本繁體中文版使用機器翻譯,譯文僅供參考,若與英文版本牴觸,應以英文版本為準。

產生AutoSupport 關於完成擴充的資訊

貢獻者

擴充叢集之後、您應該傳送AutoSupport 一個不完整的訊息、表示擴充程序已經完成。此訊息傳達給內部和外部支援人員、說明擴充已完成、並做為日後可能需要進行的任何疑難排解的時間戳記。

必須設定好顯示。AutoSupport

步驟
  1. 對於叢集中的每個節點、AutoSupport 請使用「系統節點AutoSupport 叫用」命令傳送一個功能不全的訊息。

    您必須針對叢集中的每個節點(包括新增的節點)發出一次訊息。

    如果將兩個節點新增至雙節點叢集、則必須傳送訊息四次。

    cluster1::> system node autosupport invoke -node * -message "cluster expansion complete" -type all
    The AutoSupport was successfully invoked on node "cluster1-1". To view the status
    of the AutoSupport, use the "system node autosupport history show" command.
    Note: It may take several minutes for the AutoSupport to appear in the history list.
    The AutoSupport was successfully invoked on node "cluster1-2". To view the status
    of the AutoSupport, use the "system node autosupport history show" command.
    Note: It may take several minutes for the AutoSupport to appear in the history list.
    The AutoSupport was successfully invoked on node "cluster1-3". To view the status
    of the AutoSupport, use the "system node autosupport history show" command.
    Note: It may take several minutes for the AutoSupport to appear in the history list.
    The AutoSupport was successfully invoked on node "cluster1-4". To view the status
    of the AutoSupport, use the "system node autosupport history show" command.
    Note: It may take several minutes for the AutoSupport to appear in the history list.
    4 entries were acted on.