Snapdrive for Unix
본 한국어 번역은 사용자 편의를 위해 제공되는 기계 번역입니다. 영어 버전과 한국어 버전이 서로 어긋나는 경우에는 언제나 영어 버전이 우선합니다.

액세스 제어 권한 보기

기여자

SnapDrive config access show 명령을 실행하여 액세스 제어 권한을 볼 수 있습니다.

단계
  1. 'SnapDrive config access show' 명령어를 실행한다.

    이 명령의 형식은 'SnapDrive config access{show|list}filername’입니다

    명령의 'show' 또는 'list' 버전을 입력하든 상관없이 동일한 파라미터를 사용할 수 있습니다.

    이 명령줄은 스토리지 시스템 토스터를 검사하여 호스트에 있는 권한을 확인합니다. 출력에 따라 이 스토리지 시스템의 호스트에 대한 사용 권한은 모두 스냅됩니다.

    # snapdrive config access show toaster
    This host has the following access permission to filer, toaster:
    SNAP ALL
    Commands allowed:
    snap create
    snap restore
    snap delete
    snap rename
    #

    이 예에서는 사용 권한 파일이 스토리지 시스템에 없기 때문에 SnapDrive for UNIX는 'sapdrive.conf' 파일에서 변수 'all-access-if-RBAC-unspecified'를 확인하여 호스트에 있는 사용 권한을 결정합니다. 이 변수는 액세스 수준이 모든 액세스로 설정된 권한 파일을 생성하는 것과 동일한 '온’으로 설정됩니다.

    # snapdrive config access list toaster
    This host has the following access permission to filer, toaster:
    ALL ACCESS
    Commands allowed:
    snap create
    snap restore
    snap delete
    snap rename
    storage create
    storage resize
    snap connect
    storage connect
    storage delete
    snap disconnect
    storage disconnect
    clone split estimate
    clone split start
    #

    이 예에서는 스토리지 시스템 토스터에 사용 권한 파일이 없는 경우 수신하는 메시지 종류와 'sapdrive.conf' 파일의 변수 'all-access-if-RBAC-unspecified'가 'off’로 설정되어 있음을 보여 줍니다.

    # snapdrive config access list toaster
    Unable to read the access permission file on filer, toaster. Verify that the
    file is present.
    Granting no permissions to filer, toaster.