By setting up a network, you can manage your cluster, nodes, and Service Processors. You can also set up DNS and NTP details by using the network window.
Before you begin
You must have set up the cluster.
About this task
Only those nodes that are up and running are listed for cluster creation.
You can create LIFs for those nodes.
You can disable IP address range and enter individual IP addresses for cluster management, node management, and Service Processor management networks.
Setting up a network when an IP address range is enabled
You can set up a network by enabling an IP address range. The IP address range enables you to enter IP addresses that are in the same netmask range or in the different netmask range.