fci.fwupdate events

12/07/2023 Contributors

fci.fwupdate.AutoBoot

Severity: NOTICE
Description: This message occurs when the Service Level Initiator Fibre Channel (SLIFC) Initiator driver successfully updates the firmware of the host bus adapter (HBA).
Corrective Action: None; the controller is rebooted automatically to enable the new HBA firmware.
Syslog Message: FC Initiator HBA %s firmware updated from version %s to %s. The adapter will be reset automatically to enable the new HBA firmware.
Parameters: hba (STRING): HBA where the firmware version update occurred.
currentversion (STRING): Firmware version the HBA is running.
bundleversion (STRING): Firmware version bundled with ONTAP® software.

Severity: ERROR
Description: This message occurs when the Service Level Interface Fibre Channel(SLIFC) Initiator driver successfully updates the firmware version of the host bus adapter (HBA), and requires a reboot of the controller to complete the process.
Corrective Action: Reboot the controller to enable the new HBA firmware.
Syslog Message: FC Initiator HBA %s firmware updated from version %s to %s. Reboot the controller to enable the new HBA firmware.
Parameters: hba (STRING): HBA where the firmware update occurred.
currentversion (STRING): Firmware version the HBA was running.
bundleversion (STRING): Firmware version bundled with ONTAP® software.

Severity: NOTICE
Description: This message occurs when the Service Level Initiator Fibre Channel (SLIFC) Initiator driver successfully updates the firmware of the host bus adapter (HBA).
Corrective Action: (None).
Syslog Message: FC Inititator HBA %s firmware updated successfully from version %s to %s.
Parameters: hba (STRING): HBA where the firmware update occurred.
currentversion (STRING): Firmware version the HBA was running.
bundleversion (STRING): Firmware version bundled with ONTAP® software.

Severity: ERROR
Description: This message occurs when the Service Level Initiator Fibre Channel (SLIFC) Initiator driver encounters an error while updating the firmware of the host bus adapter (HBA).
Corrective Action: Contact NetApp technical support for further analysis.
Syslog Message: FC Initator HBA %s failed to update the firmware from version %s to %s with the status of %d.
Parameters: hba (STRING): HBA where the firmware update failure occurred.
currentversion (STRING): Firmware version the HBA is running.
bundleversion (STRING): Firmware version bundled with ONTAP® software.
status (INT): Status code of the firmware update process.