Skip to main content
Active IQ Unified Manager 9.10
A newer release of this product is available.

Viewing Storage VMs based on protection status

Contributors netapp-manini
PDFs

You can use the Storage VMs page of the Inventory to view all the storage VMs in Active IQ Unified Manager and filter the storage VMs based on their protection status.

What you'll need

You must have the Application Administrator or Storage Administrator role.

A new column Protection Role is added to the storage VMs view that provides information on whether the storage VM is protected or unprotected.

Note

If a source cluster is not added to Active IQ Unified Manager, then all the information related to that cluster is unavailable in the grids.
Steps

  1. In the left navigation pane, click STORAGE > Storage VMs.

  2. From the VIEW menu, select Health > All Storage VMs.

    The Health: All Storage VMs is displayed.

  3. Click Filter to view one of the following storage VMs.

    To view Filter value

    Protected storage VMs

    Protection Role is Protected

    Unprotected storage VMs

    Protection Role is Unprotected
    Note

    You cannot view both the protected and unprotected storage VMs at the same time. You will need to clear the existing filter to reapply a new filter option.

  4. Click Apply Filter.

    The Unsaved view displays all the storage VMs that are either protected or unprotected by storage VM disaster recovery based on your filter selections.