Skip to main content
SANtricity commands

Save storage array host port statistics

Contributors netapp-driley

The save storageArray hostPortStatistics command saves the storage array host port statistics.

Supported Arrays

This command applies to an individual E2800, E5700, EF600 or EF300 storage array. It does not operate on E2700 or E5600 storage arrays.

Roles

To execute this command on an E2800, E5700, EF600, or EF300 storage array, you must have the Storage Admin or Security Admin role.

Syntax

save storageArray hostPortStatistics [(raw | baseline)] type=(ISCSI| ISER | SRP | NVMEOF) file="filename"

Parameters

Parameter Description

raw

Allows you to retrieve the collected statistics since start-of-day. Enclose the parameter in square brackets ([ ]).

baseline

Allows you to retrieve the collected statistics from the time the controllers' baselines were reset to zero. Enclose the parameter in square brackets ([ ]).

type

Allows you to indicate which statistics type to collect. Valid choices are: ISCSI, ISER, SRP, and NVMEOF.

file

Allows you to specify the file path and filename to save the statistics. Enclose the file name in double quotation marks (" "). Use any file name with the .csv extension.

Type Ethernet MAC, Ethernet TCP/IP, Local Initiator (Protocol), DCBX Operational State, LLDP TLV, DCBX TLV Target (Protocol) InfiniBand Interface NVMe Subsystem ASUP Filename

iscsi

X

X

iser

X

X

srp

X

nvmeof

X

X

Minimum firmware level

8.41