Configure NVMe over InfiniBand ports
If your controller includes an NVMe over InfiniBand connection, you can configure the NVMe port settings from the Hardware page or the System page.
-
Your controller must include an NVMe over InfiniBand host port; otherwise, the NVMe over InfiniBand settings are not available in System Manager.
-
You must know the IP address of the host connection.
You can access the NVMe over InfiniBand configuration from the Hardware page or from
. This task describes how to configure the ports from the Hardware page.
|
The NVMe over InfiniBand settings and functions appear only if your storage array's controller includes an NVMe over InfiniBand port. |
-
Select Hardware.
-
If the graphic shows the drives, click Show back of shelf.
The graphic changes to show the controllers instead of the drives.
-
Click the controller with the NVMe over InfiniBand port you want to configure.
The controller's context menu appears.
-
Select Configure NVMe over InfiniBand ports.
The Configure NVMe over InfiniBand Ports dialog box opens.
-
In the drop-down list, select the HIC port you want to configure, and then enter the IP address of the host.
-
Click Configure.
-
Complete the configuration, and then reset the NVMe over InfiniBand port by clicking Yes.