Skip to main content
SANtricity 11.7
A newer release of this product is available.

Drive states

Contributors

System Manager reports various states for drives.

Accessibility states

State Definition

Bypassed

The drive is physically present, but the controller cannot communicate with it on either port.

Incompatible

One of the following conditions exists:

  • The drive is not certified for use in the storage array.

  • The drive has a different sector size.

  • The drive has unusable configuration data from an older or newer firmware version.

Removed

The drive has been improperly removed from the storage array.

Present

The controller can communicate with the drive on both ports.

Unresponsive

The drive is not responding to commands.

Role states

State Definition

Assigned

The drive is a member of a pool or volume group.

In-use hot spare

The drive is currently being used as a replacement for a drive that has failed. Hot spares are used only in volume groups, not pools.

Standby hot spare

The drive is ready to be used as a replacement for a drive that has failed. Hot spares are used only in volume groups, not pools.

Unassigned

The drive is not a member of a pool or volume group.

Availability states

State Definition

Failed

The drive is not working. The data on the drive is not available.

Impending Failure

It has been detected that the drive could fail soon. The data on the drive is still available.

Offline

The drive is not available for storing data usually because it is part of a volume group that is being exported or it is undergoing a firmware upgrade.

Optimal

The drive is working normally.