Configure iSER over InfiniBand ports
Contributors
Suggest changes
If your controller includes an iSER over InfiniBand port, you can configure the network connection to the host.
Before you begin
-
Your controller must include an iSER over InfiniBand port; otherwise, the iSER over InfiniBand settings are not available in System Manager.
-
You must know the IP address of the host connection.
Steps
-
Select
. -
Under iSER over InfiniBand settings, select Configure iSER over InfiniBand ports.
-
Click the controller with the iSER over InfiniBand port you want to configure. Click Next.
-
In the drop-down list, select the HIC port you want to configure, and then enter the IP address of the host.
-
Click Finish.
-
Reset the iSER over InfiniBand port by clicking Yes.