Virtual infrastructure requirements
Suggest changes
PDFs
Your VMware vSphere system must meet several requirements before you can install Keystone Collector.
-
Operating system: VMware vCentre server and ESXi 6.7 or later
-
Core: 1 CPU
-
RAM: 2 GB RAM
-
Disk space: 20 GB vDisk
Other requirements
Ensure that the following generic requirements are met:
Networking Requirements
The networking requirements of Keystone Collector are listed in the following table.
|
Keystone Collector requires internet connectivity. You can provide internet connectivity by direct routing through default Gateway (via NAT), or through HTTP Proxy. Both variants are described here. |
Source |
Destination |
Service |
Protocol and Ports |
Category |
Purpose |
Keystone Collector (for Keystone ONTAP) |
Active IQ Unified Manager (Unified Manager) |
HTTPS |
TCP 443 |
Mandatory (if using Keystone ONTAP) |
Keystone Collector usage metrics collection for ONTAP |
Keystone Collector (for Keystone StorageGRID) |
StorageGRID Admin Nodes |
HTTPS |
TCP 443 |
Mandatory (if using Keystone StorageGRID) |
Keystone Collector usage metrics collection for StorageGRID |
Keystone Collector (generic) |
Internet (as per URL requirements given later) |
HTTPS |
TCP 80, TCP 443 |
Mandatory (internet connectivity) |
Keystone Collector software, OS updates, and metrics upload |
Keystone Collector (generic) |
Customer HTTP Proxy |
HTTP Proxy |
Customer Proxy Port |
Mandatory (internet connectivity) |
Keystone Collector software, OS updates, and metrics upload |
Keystone Collector (generic) |
Customer DNS Servers |
DNS |
TCP/UDP 53 |
Mandatory |
DNS resolution |
Keystone Collector (generic) |
Customer NTP Servers |
NTP |
UDP 123 |
Mandatory |
Time synchronization |
Keystone Collector (for Keystone ONTAP) |
Unified Manager |
MYSQL |
TCP 3306 |
Optional Functionality |
Performance metrics collection for Keystone Collector |
Keystone Collector (generic) |
Customer Monitoring System |
HTTPS |
TCP 7777 |
Optional Functionality |
Keystone Collector health reporting |
Customer's Operations Workstations |
Keystone Collector |
SSH |
TCP 22 |
Management |
Access to the Keystone Collector Management |
NetApp ONTAP Cluster and Node Management Addresses |
Keystone Collector |
HTTP_8000, PING |
TCP 8000, ICMP Echo Request/Reply |
Optional Functionality |
Webserver for ONTAP firmware updates |
|
|
The default port for MySQL, 3306, is restricted only to localhost during a fresh installation of Unified Manager, which prevents the collection of performance metrics for Keystone Collector. For more information, see ONTAP requirements. |
URL access
Keystone Collector needs access to the following internet hosts:
Address |
Reason |
Keystone Collector software updates and usage reporting |
|
NetApp HQ for billing information and AutoSupport delivery |