application commands
storage disk remove
Contributors
Suggest changes
-
PDF of this doc site
Collection of separate PDF docs
Creating your file...
This may take a few minutes. Thanks for your patience.
Your file is ready
Remove a spare disk
Availability: This command is available to cluster administrators at the admin privilege level.
Description
The storage disk remove command removes the specified spare disk from the RAID configuration, spinning the disk down when removal is complete.
This command does not remove disk ownership information from the disk. Therefore, if you plan to reuse the disk in a different storage system, you should use the storage disk removeowner command instead. See the "Physical Storage Management Guide" for the complete procedure.
|
For systems with multi-disk carriers, it is important to ensure that none of the disks in the carrier are filesystem disks before attempting removal. To convert a filesystem disk to a spare disk, see storage disk replace . |
Parameters
-disk <disk path name>- Disk Name-
This parameter specifies the disk to be removed.
Examples
The following example removes a spare disk named 1.1.16:
cluster1::> storage disk remove -disk 1.1.16