Skip to main content
A newer release of this product is available.

network interface service-policy remove-service

Contributors
Suggest changes
PDFs

Remove a service entry from an existing service policy

Availability: This command is available to cluster administrators at the advanced privilege level.

Description

The network interface service-policy remove-service command removes an individual service from an existing service policy. Other services in the the policy are not impacted by the change.

Parameters

-vserver <vserver name> - Vserver (privilege: advanced)

Use this parameter to specify the name of the Vserver of the service policy to be updated.

-policy <text> - Policy Name (privilege: advanced)

Use this parameter to specify the name of service policy to be updated.

-service <LIF Service Name> - Service entry to be removed (privilege: advanced)

Use this parameter to specify the name of service to be removed from the existing service policy.

Examples

The following example shows the removal of a service from an existing service policy.

cluster1::> network interface service-policy show
Vserver   Policy                 Service: Allowed Addresses
--------- ---------------------- ------------------------------------------
cluster1  net-intercluster       intercluster-core: 0.0.0.0/0
                                 management-bgp: 0.0.0.0/0

1 entries were displayed.

cluster1::> network interface service-policy remove-service -vserver cluster1 -policy net-intercluster -service management-bgp

cluster1::> network interface service-policy show
Vserver   Policy                 Service: Allowed Addresses
--------- ---------------------- ------------------------------------------
cluster1  net-intercluster       intercluster-core: 0.0.0.0/0

1 entries were displayed.