system services firewall policy show
Suggest changes
PDFs
Show firewall policies
Availability: This command is available to cluster and Vserver administrators at the admin privilege level.
Description
The system services firewall policy show command displays information about firewall policies.
Parameters
- {
[-fields <fieldname>,…] -
If you specify the
-fields <fieldname>,…parameter, the command displays only the fields that you specify. - |
[-instance ]} -
Use this parameter to display all the fields for the specified policies.
[-vserver <vserver>]- Vserver Name-
Use this parameter to display information only about the Vserver you specify.
[-policy <textpolicy_name>]- Policy-
Use this parameter to display information about the policy you specify.
[-service <service>]- Service-
Use this parameter to display information about the services you specify.
[-allow-list <IP Address/Mask>,…]- Allowed IPs-
Use this parameter to display information about the firewall policies that match the list of allowed IP addresses and netmasks you specify. The correct format for this parameter is address/netmask, similar to "192.0.2.128/25". Multiple address/netmask pairs should be separated with commas.
[-ipspace <text>]- IPspace-
Use this parameter to display information only about the IPspace you specify.
Examples
The following example displays information about all firewall policies:
cluster1::> system services firewall policy show
Vserver Policy Service Allowed
------- ------------ ---------- -------------------
cluster1
data
dns 0.0.0.0/0, ::/0
ndmp 0.0.0.0/0, ::/0
ndmps 0.0.0.0/0, ::/0
cluster1
intercluster
ndmp 0.0.0.0/0, ::/0
ndmps 0.0.0.0/0, ::/0
cluster1
mgmt
dns 0.0.0.0/0, ::/0
http 0.0.0.0/0, ::/0
ndmp 0.0.0.0/0, ::/0
ndmps 0.0.0.0/0, ::/0
ntp 0.0.0.0/0, ::/0
snmp 0.0.0.0/0, ::/0
cluster1
mgmt-nfs
dns 0.0.0.0/0, ::/0
http 0.0.0.0/0, ::/0
ndmp 0.0.0.0/0, ::/0
ndmps 0.0.0.0/0, ::/0
ntp 0.0.0.0/0, ::/0
snmp 0.0.0.0/0, ::/0
17 entries were displayed.
cluster1::>