ERROR

This message occurs when dynamic device qualification fails due to an invalid /etc/qual_devices file. The system is unable to properly recognize disk drives or fully enable all resiliency and performance features.

For further information about correcting the problem, search the knowledgebase of the NetApp technical support support web site for the "[disk.dynamicqual.fail.parse]" keyword. Request an updated qual_devices file from NetApp.

Device qualification information file (/etc/qual_devices) is invalid. The following error, "%s" has been detected. For further information about correcting the problem, search the knowledgebase of the NetApp technical support support web site for the "[disk.dynamicqual.fail.parse]" keyword.

errorstring (STRING): Error string for parsing error in /etc/qual_devices file.

NOTICE

This message occurs when a previous dynamic device qualification error has been corrected.

(None).

Device qualification failure condition has been corrected. All devices have been qualified.

(None).

ALERT

This message occurs when dynamic device qualification fails due to an invalid /etc/qual_devices file.

See the qual_devices man page for information about updating device qualification data. Request an updated qual_devices file from NetApp.

Device qualification information file (/etc/qual_devices) is invalid. See the qual_devices man page for corrective action. This problem must be corrected within %d hour(s) to avoid a forced system shutdown. The following disk(s) remain unqualified: %s.

time (INT): Time until forced shutdown.
disklist (STRING): List of disks that are still not qualified.

ALERT

This message occurs when dynamic device qualification fails with a missing qualification file.

See the qual_devices man page for information about updating device qualification data. Request a qual_devices file from NetApp.

Device Qualification information file (/etc/qual_devices) is missing. See the qual_devices man page for corrective action. This problem must be corrected within %d hour(s) to avoid a forced system shutdown. The following disk(s) remain unqualified: %s.

time (INT): Time until forced shutdown.
disklist (STRING): List of disks that are still not qualified.

ALERT

This message occurs when dynamic device qualification fails with an unknown error.

See the qual_devices man page for information about updating device qualification data.

Device qualification failure occurred. See the qual_devices man page for corrective action. This problem must be corrected within %d hour(s) to avoid a forced system shutdown. The following disk(s) remain unqualified: %s.

time (INT): Time until forced shutdown.
disklist (STRING): List of disks that are still not qualified.

EMERGENCY

This message occurs when one or more disks are not recognized by Data ONTAP®. This can result in a forced system shutdown if the offending disks are not removed or recognized properly within the allowed window of time.

Download the latest Drive Qualification Package (DQP) from NetApp technical support, and then install it on your system.

Device qualification failure has not been corrected for the past %d hour(s). The following disk(s) remain unqualified: %s. System is SHUTTING DOWN.

time (INT): Time until forced shutdown.
disklist (STRING): List of disks that are still not qualified.