NOTICE

This message occurs when an encrypted flexible volume is created.

(None).

New %s encrypted volume %s is created on aggregate %s.

key_type (STRING): This Indicates encryption type of this volume is NetApp Aggregate Encryption (NAE) or NetApp Volume Encryption (NVE).
vol (STRING): Volume name.
aggr (STRING): Name of the containing aggregate.
voluuid (STRING): Volume UUID.
keyid (STRING): Encryption Key ID.
buftreeid (LONGINT): Buftreeid.
cp_count (INT): Consistency Point (CP) at which this volume is created.

NOTICE

This message occurs when the system cannot remove volume metadata during a volume delete operation after moving it to recycle bin.

(None).

Could not remove volume %s%s%s metadata. Error: %d.

vol (STRING): Name of the flexible volume.
app (STRING): Application UUID.
volident (STRING): Unique identifier for the volume when the volume name alone is insufficient.
errorCode (INT): Error number.

NOTICE

This message occurs when the system cannot rename volume metadata during a volume delete operation.

(None).

Could not rename volume %s%s%s metadata. Error: %d.

vol (STRING): Name of the flexible volume.
app (STRING): Application UUID.
volident (STRING): Unique identifier for the volume when the volume name alone is insufficient.
errorCode (INT): Error number.

NOTICE

This message occurs when the system cannot remove volume metadata during a volume delete operation. The system will retry removing the metadata during any operation that brings the containing aggregate online(for example, takeover).

(None).

Cannot remove volume %s%s%s metadata. Error: %s(%d).

vol (STRING): Name of the flexible volume.
app (STRING): Application UUID.
volident (STRING): Unique identifier for the volume when the volume name alone is insufficient.
reason (STRING): Reason for the failure.
errorCode (INT): Error number.

INFORMATIONAL

This event occurs when a flexible volume that was queued for delete is recovered.

(None).

Volume %s%s%s%s recovered.

owner (STRING): String indicating the owner of the affected volume.
vol (STRING): Name of the flexible volume.
app (STRING): Application UUID.
volident (STRING): Unique identifier for the volume when the volume name alone is insufficient.

NOTICE

This message occurs when a flexible volume is destroyed.

(None).

Volume %s%s%s%s destroyed.

owner (STRING): String indicating the owner of the affected volume.
vol (STRING): Name of the flexible volume.
app (STRING): Application UUID.
volident (STRING): Unique identifier for the volume when the volume name alone is insufficient.
vol_btid (LONGINT): Internal buftree identifier for the volume.

INFORMATIONAL

This message occurs when an encrypted virtual volume is taken offline.

(None).

Volume '%s%s%s' is encrypted and was taken offline.

name (STRING): Volume name.
app (STRING): Application UUID.
volident (STRING): Unique identifier of the volume when the volume name by itself is insufficient.

ERROR

This message occurs when a flexible volume container that exceeds the maximum size supported on the running platform is detected. This event can be encountered after a headswap to a platform supporting a lower maximum capacity.

Back up the dataset in the volume as soon as possible and take the volume offline. Alternatively, consider a system or hardware upgrade to a platform that supports a higher maximum capacity.

Volume '%s' exceeded the maximum container capacity supported on this platform (container blkcnt=%llu, maxlimit=%llu). Back up the dataset and take the volume offline as soon as possible.

vol (STRING): The volume name
blkcount (LONGINT): The total blocks capacity of the volume container
maxblkcount (LONGINT): The maximum container capacity supported on the platform

ERROR

This message occurs when a flexible volume that exceeds the maximum size supported on the running platform is detected. This event can be encountered after a headswap to a platform supporting a lower maximum capacity.

If possible, shrink the flexible volume using the 'vol size' command. If not, back up the dataset in the volume as soon as possible and take the volume offline. Alternatively, consider a system or hardware upgrade to a platform that supports a higher maximum capacity.

Volume '%s' exceeded the maximum volume size supported on this platform (nominal blkcnt=%llu, maxlimit=%llu). Shrink the volume or back up the dataset and take the volume offline as soon as possible.

vol (STRING): Volume name
blkcount (LONGINT): Total block count of the volume.
maxblkcount (LONGINT): Maximum block count supported on the platform.

ERROR

This message occurs when ONTAP® finds a volume with an invalid data set identifier (DSID). This might have occurred as a result of disk corruption.

Contact NetApp technical support to have a new DSID assigned to the volume as soon as possible.

Volume '%s%s%s' has an invalid DSID (0x%x).

vol (STRING): Volume name.
app (STRING): Application UUID.
volident (STRING): To uniquely identify the volume in cases where the volume name itself is insufficient.
dsid (LONGINT): Data set identifier.

NOTICE

This message occurs when an encrypted destination volume is created as part of volume move operation.

(None).

%s encrypted volume %s%s%s is created on aggregate %s as part of a volume move operation.

key_type (STRING): This Indicates encryption type of this volume is NetApp Aggregate Encryption (NAE) or NetApp Volume Encryption (NVE).
vol (STRING): Volume name.
app (STRING): Application UUID.
volident (STRING): To uniquely identify the volume in cases where the volume name itself is insufficient.
aggr (STRING): Name of the containing aggregate.
voluuid (STRING): Volume UUID.
keyid (STRING): Encryption Key ID.
buftreeid (LONGINT): Buftreeid.
cp_count (INT): Consistency Point (CP) at which this volume is created.

INFORMATIONAL

This message indicates when a virtual volume is taken offline.

(None).

Volume '%s%s%s' has been set temporarily offline

name (STRING): Volume name.
app (STRING): Application UUID.
volident (STRING): Unique identifier of the volume when the volume name by itself is insufficient.
instuuid (STRING): Volume Instance UUID

NOTICE

This event is issued if the system fail to set the raid label of the virtual volume when it's taken offline.

(None).

Error persistently transitioning volume %s%s%s from 'restricted' to 'offline', unable to update descriptor, error %d

name (STRING): The volume name
app (STRING): Application UUID.
volident (STRING): To uniquely identify the volume in cases where volume name itself is insufficient.
error (INT): The error code

INFORMATIONAL

This message occurs when a flexible volume that was marked temporarily offline as part of the volume migration process is now marked persistently offline.

(None).

(None).

name (STRING): Volume name
app (STRING): Application UUID.
volident (STRING): To uniquely identify the volume in cases where the volume name itself is insufficient.

INFORMATIONAL

This event occurs when the state of flexible volume moves to the online state.

(None).

(None).

vol (STRING): The name of the flexible volume
app (STRING): Application UUID.
volident (STRING): To uniquely identify the volume in cases where volume name itself is insufficient.
instuuid (STRING): Volume instance UUID

INFORMATIONAL

This message occurs when either a cluster repair tool changes the owning vserver of the volume, or when the volume is transitioned from being a node volume to a cluster volume or vice versa.

(None).

Volume '%s%s' owning vserver / name changed to '%s%s%s'.

oldname (STRING): Original name of the volume.
oldownerIdent (STRING): Original vserver identifier.
newname (STRING): New name of the volume.
app (STRING): Application UUID.
newownerIdent (STRING): New vserver identifier.

INFORMATIONAL

This message occurs when the administrator renames a flexible volume.

(None).

Volume '%s%s' renamed to '%s%s%s'.

oldname (STRING): Original volume name.
volident1 (STRING): Unique identifier of the volume in cases where the volume name itself is insufficient.
newname (STRING): New volume name.
app (STRING): Application UUID.
volident2 (STRING): Unique identifier of the volume in cases where the volume name itself is insufficient.

INFORMATIONAL

This event is issued to indicate a flexible volume has been restricted

(None).

(None).

vol (STRING): The volume name
app (STRING): Application UUID.
volident (STRING): To uniquely identify the volume in cases where volume name itself is insufficient.
instuuid (STRING): Volume Instance UUID

ERROR

This message occurs when the verification of the vvlabel fails on a flexible volume. This event provides all the information available in the vvlabel so that it can be used later, for recovery.

Contact NetApp technical support.

Cannot determine volume label information (%s). (Flexible volume with UUID '%s', unique ID '%d' on aggregate '%s' with raidtree ID '%s')

err (STRING): Error string.
voluuid (STRING): UUID of the flexible volume as identified by the metadir.
id_in_aggr (INTHEX): Unique ID within the containing aggregate.
aggr_name (STRING): Containing aggregate name.
aggr_rtid (STRING): RAID tree ID of the aggregate.
version (INTHEX): vvlabel version.
mirror_flags (INTHEX): Mirror type flags.
vol_flags (INTHEX): Flags for the volume.
fsid (INTHEX): File system identifier for the volume.
clone_parent (INTHEX): 'id_in_aggr' value of the clone's parent volume.
base_snapid (INTHEX): Clone base snapshot ID.
vvuuid (STRING): UUID of the flexible volume as identified by the vvlabel.
vvol_type (INTHEX): Flexible volume's type.
dsid (LONGINTHEX): Volume data set identifier.
msid (LONGINTHEX): Volume master data set identifier.
owneruuid (STRING): UUID of the owning Vserver.
volname (STRINGARRAY): Volume name in raw hexadecimal format.

ERROR

This message occurs when transfer to a destination flexible volume has fails because the aggregate that contains this volume is out of space.

For non-ASA r2 platforms, increase space available in the aggregate by either adding disks or freeing space by deleting aggregate Snapshot copies, shrinking flexible volumes or moving flexible volumes to another aggregate. Ensure that there is sufficient space available in the aggregate (using the "df -A command") to accommodate the flexible volumes it contains. The "volume size" command may be used to obtain flexible volume sizes and also to grow or shrink them. For ASA r2 platforms, increase space in an aggregate by either adding disks to the cluster or freeing space by deleting data or Snapshot copies. To delete a Snapshot copy, use the "vserver consistency-group snapshot delete" command.

Transfer to volume "%s%s%s" failed because the containing aggregate, "%s", is out of space.

vol (STRING): The volume name
app (STRING): Application universal unique identifier(UUID)
volident (STRING): To uniquely identify the volume in cases where volume name itself is insufficient.
aggr (STRING): The aggregate name.