Skip to main content
ONTAP Mediator

Verify the ONTAP Mediator installation status

Contributors netapp-camdenc netapp-aoife
PDFs

After you install ONTAP Mediator, verify that it is running successfully.

Steps

  1. View the status of ONTAP Mediator:

    systemctl status ontap_mediator
     ontap_mediator.service - ONTAP Mediator
Loaded: loaded (/etc/systemd/system/ontap_mediator.service; enabled; vendor preset: disabled)
Active: active (running) since Mon 2022-04-18 10:41:49 EDT; 1 weeks 0 days ago
Process: 286710 ExecStop=/bin/kill -s INT $MAINPID (code=exited, status=0/SUCCESS)
Main PID: 286712 (uwsgi)
Status: "uWSGI is ready"
Tasks: 3 (limit: 49473)
Memory: 139.2M
CGroup: /system.slice/ontap_mediator.service
      ├─286712 /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi --ini /opt/netapp/lib/ontap_mediator/uwsgi/ontap_mediator.ini
      ├─286716 /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi --ini /opt/netapp/lib/ontap_mediator/uwsgi/ontap_mediator.ini
      └─286717 /opt/netapp/lib/ontap_mediator/pyenv/bin/uwsgi --ini /opt/netapp/lib/ontap_mediator/uwsgi/ontap_mediator.ini

  2. View the SCST status:

    systemctl status mediator-scst
    Note If you installed ONTAP Mediator 1.12 or later with support for HTTPS only, the SCST package is not installed and you can skip this step. 
       Loaded: loaded (/etc/systemd/system/mediator-scst.service; enabled; vendor preset: disabled)
   Active: active (running) since Mon 2022-04-18 10:41:47 EDT; 1 weeks 0 days ago
  Process: 286595 ExecStart=/etc/init.d/scst start (code=exited, status=0/SUCCESS)
 Main PID: 286662 (iscsi-scstd)
    Tasks: 1 (limit: 49473)
   Memory: 1.2M
   CGroup: /system.slice/mediator-scst.service
           └─286662 /usr/local/sbin/iscsi-scstd

  3. Confirm the ports that are used by ONTAP Mediator:

    netstat -anlt | grep -E '3260|31784'
             tcp   0   0 0.0.0.0:31784   0.0.0.0:*      LISTEN

         tcp   0   0 0.0.0.0:3260    0.0.0.0:*      LISTEN

         tcp6  0   0 :::3260         :::*           LISTEN
What's next?

After ONTAP Mediator is installed and verified, you can proceed with the following post-installation configuration tasks: