MetroCluster release notes
Platform port assignments for Cisco 3132Q-V switches
Suggest changes
-
PDF of this doc site
-
Install a fabric-attached MetroCluster
-
Install a MetroCluster IP configuration
-
Install a stretch MetroCluster configuration
-
Transition from MetroCluster FC to MetroCluster IP
-
Collection of separate PDF docs
Creating your file...
The port usage in a MetroCluster IP configuration depends on the switch model and platform type.
Review these guidelines before using the tables:
-
If you configure the switch for MetroCluster FC to IP transition, port 5, port 6, port 13, or port 14 can be used to connect the local cluster interfaces of the MetroCluster FC node. Refer to the RcfFileGenerator and the generated cabling files for more details on cabling this configuration. For all other connections, you can use the port usage assignments listed in the tables.
Choose the correct cabling table for your configuration
Use the following table to determine which cabling table you should follow.
| If your system is… | Use this cabling table… |
|---|---|
FAS2750, AFF A220 |
|
FAS9000, AFF A700 |
|
AFF A800, ASA A800 |
Review the platform port assignments to cable a FAS2750 or AFF A220 system to a Cisco 3132Q-V switch:
Review the platform port assignments to cable a FAS9000 or AFF A700 system to a Cisco 3132Q-V switch:
Review the platform port assignments to cable an AFF A800 or ASA A800 system to a Cisco 3132Q-V switch:
