Review cabling and configuration considerations for Cisco Nexus 3232C cluster switches
Contributors
Suggest changes
PDFs
Review the cabling and configuration considerations for Cisco Nexus 3232C cluster switches before deployment.
Support for NVIDIA CX6, CX6-DX, and CX7 Ethernet ports
If connecting a switch port to an ONTAP controller using NVIDIA ConnectX-6 (CX6), ConnectX-6 Dx (CX6-DX), or ConnectX-7 (CX7) NIC ports, you must hard-code the switch port speed.
(cs1)(config)# interface Ethernet1/19 For 100GbE speed: (cs1)(config-if)# speed 100000 For 40GbE speed: (cs1)(config-if)# speed 40000 (cs1)(config-if)# no negotiate auto (cs1)(config-if)# exit (cs1)(config)# exit Save the changes: (cs1)# copy running-config startup-config
Related information
-
Refer to the Hardware Universe for more information on switch ports.
-
Refer to What additional information do I need to install my equipment that is not in HWU? for more information about switch installation requirements.