Skip to main content
Cluster and storage switches

Complete your migration from 5596 switches to 3232C switches

Contributors netapp-yvonneo
PDFs

Complete the following steps to finalize the Nexus 5596 switches migration to Nexus 3232C switches.

Steps

  1. Verify that the proper cluster switches are monitored:

    system cluster-switch show

    Show example 
    cluster::> system cluster-switch show

Switch                      Type               Address          Model
--------------------------- ------------------ ---------------- ---------------
C1                          cluster-network    10.10.1.103      NX3232C
     Serial Number: FOX000001
      Is Monitored: true
            Reason:
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                    7.0(3)I4(1)
    Version Source: CDP

C2                          cluster-network    10.10.1.104      NX3232C
     Serial Number: FOX000002
      Is Monitored: true
            Reason:
  Software Version: Cisco Nexus Operating System (NX-OS) Software, Version
                    7.0(3)I4(1)
    Version Source: CDP

2 entries were displayed.

  2. If you suppressed automatic case creation, re-enable it by invoking an AutoSupport message:

    system node autosupport invoke -node * -type all -message MAINT=END

What's next?

Configure switch health monitoring.