Skip to main content

Docs
English
All NetApp

All docs
ONTAP hardware systems

Upgrade controllers

ONTAP Hardware Upgrade Documentation
Choose your controller hardware upgrade procedure
Upgrade by using aggregate relocation
Upgrade by moving volumes or storage
Legal notices

Overview

Contributors

Suggest changes

Request doc changes
Edit this page
Learn how to contribute

PDF of this doc site
- Upgrade by using aggregate relocation
  - Use "system controller replace" commands to upgrade controller models in the same chassis
    - Stage 1. Prepare for upgrade
    - Stage 2. Relocate resources and retire node1
    - Stage 3. Boot node1 with the replacement system modules
    - Stage 4. Relocate resources and retire node2
    - Stage 5. Install the replacement system modules on node2
    - Stage 6. Boot node2 with the replacement system modules
    - Stage 7. Complete the upgrade
    - Troubleshoot
  - Use "system controller replace" commands to upgrade controller hardware running ONTAP 9.8 or later
    - Stage 1. Prepare for upgrade
    - Stage 2. Relocate and retire node1
    - Stage 3. Install and boot node3
    - Stage 4. Relocate and retire node2
    - Stage 5. Install and boot node4
    - Stage 6. Complete the upgrade
    - Troubleshoot
  - Manually upgrade controller hardware running ONTAP 9.8 or later
    - Stage 1. Prepare for upgrade
    - Stage 2. Relocate and retire node1
    - Stage 3. Install and boot node3
    - Stage 4. Record information and retire node2
    - Stage 5. Install and boot node4
    - Stage 6. Complete the upgrade
    - Troubleshoot
  - Use "system controller replace" commands to upgrade controller hardware running ONTAP 9.5 to 9.7
    - Stage 1. Prepare for upgrade
    - Stage 2. Relocate and retire node1
    - Stage 3. Install and boot node3
    - Stage 4. Relocate and retire node2
    - Stage 5. Install and boot node4
    - Stage 6. Complete the upgrade
    - Troubleshoot
  - Manually upgrade controller hardware running ONTAP 9.7 or earlier
    - Reconfigure the FC switch layout for ONTAP 9.1 or later
    - Stage 1. Prepare for upgrade
    - Stage 2. Relocate and retire node1
    - Stage 3. Install and boot node3
    - Stage 4. Record information and retire node2
    - Stage 5. Install and boot node4
    - Stage 6. Complete the upgrade
    - Troubleshoot
- Upgrade by moving volumes or storage
  - Upgrade by moving storage
    - Optional - Move internal storage or convert to drive shelf
    - Complete upgrade
      - Complete in ONTAP 9.8 or later
      - Complete in ONTAP 9.7 or earlier
  - Upgrade by moving volumes
    - Move, delete, or create SAN LIFS
  - Upgrade AFF A250 to AFF A400 by converting to a drive shelf

Collection of separate PDF docs

Creating your file...

This may take a few minutes. Thanks for your patience.

Your file is ready

During Stage 4, you relocate non-root aggregates and NAS data LIFs from node2 to the upgraded node1 and retire node2.

Steps

Relocate non-root aggregates and NAS data LIFs from node2 to node1
Retire node2

On this page

© 2024 NetApp, Inc.

Terms of use
Privacy policy
Cookie policy
Cookie settings

Send feedback about this page