Skip to main content

Stage 3 overview

Contributors netapp-pcarriga netapp-aoife
PDFs

During Stage 3, you install and boot node3, map the cluster and node-management ports from node1 to node3, verify the node3 installation, and move data LIFs and SAN LIFs belonging to node1 from node2 to node3. You also relocate all aggregates from node2 to node3 and move the data LIFs and SAN LIFs owned by node2 to node3.

Steps

  1. Install and boot node3

  2. Set the FC or UTA/UTA2 configuration on node3

  3. Map ports from node1 to node3

  4. Verify the node3 installation

  5. Move NAS data LIFs owned by node1 from node2 to node3 and verify SAN LIFs on node3

  6. Relocate non-root aggregates from node2 to node3

  7. Move NAS data LIFs owned by node2 to node3