Obtaining additional equipment and tools (SG100 and SG1000)
-
PDF of this doc site
- Install and upgrade software
-
Install and maintain hardware
- SG5700 storage appliances
- SG5600 storage appliances
-
Configure and manage
- Administer StorageGRID
- Use StorageGRID
-
Monitor and troubleshoot
- Monitor a StorageGRID system
Collection of separate PDF docs
Creating your file...
Before installing the StorageGRID appliance, confirm you have all of the additional equipment and tools that you need.
You need the following additional equipment to install and configure the hardware:
-
Screwdrivers
Phillips No. 2 screwdriver
Medium flat-blade screwdriver
-
ESD wrist strap
-
Optical cables and transceivers
-
Cable
-
TwinAx/Copper (1 to 4)
or
-
Fibre/Optical (1 to 4)
-
-
1 to 4 of each of these transceivers/adapters based on link speed (mixed speeds are not supported)
-
SG100:
Link speed (GbE) Required equipment 10
SFP+ transceiver
25
SFP28 transceiver
-
SG1000:
Link speed (GbE) Required equipment 10
QSFP-to-SFP adapter (QSA) and SFP+ transceiver
25
QSFP-to-SFP adapter (QSA) and SFP28 transceiver
40
QSFP+ transceiver
100
QFSP28 transceiver
-
-
-
RJ-45 (Cat5/Cat5e/Cat6/Cat6a) Ethernet cables
-
Service laptop
Supported web browser
1-GbE (RJ-45) port
Some ports might not support 10/100 Ethernet speeds. -
Optional tools
Power drill with Phillips head bit
Flashlight