Skip to main content

Shut down the services appliance

Contributors netapp-lhalbert netapp-pcelmer netapp-perveilerk

Shut down the services appliance to perform hardware maintenance.

What you'll need
About this task

To prevent service interruptions, shut down the services appliance during a scheduled maintenance window when periods of service disruption are normally expected.

  1. When the appliance has been placed in maintenance mode, shut down the appliance:

    Caution You must perform a controlled shut down of the controller by entering the commands specified below. Shutting down the appliance using the power switch will result in data loss.
    1. Log in to the grid node using PuTTY or another ssh client:

      1. Enter the following command: ssh admin@grid_node_IP

      2. Enter the password listed in the Passwords.txt file.

      3. Enter the following command to switch to root: su -

      4. Enter the password listed in the Passwords.txt file.

        When you are logged in as root, the prompt changes from $ to #.

    2. Shut down the services appliance:
      shutdown -h now

      This command might take up to 10 minutes to complete.

  2. Use one of the following methods to verify that the appliance is powered off:

    • Look at the power LED on the front of the appliance and confirm that it is off.

    • Check the Power Control page of the BMC interface to confirm the appliance is off.