Locate appliance in data center
-
PDF of this doc site
- Install and upgrade
- Configure and manage
-
Maintain
- Recover nodes and maintain your grid
Collection of separate PDF docs
Creating your file...
Locate the appliance so that you can perform hardware maintenance or upgrades.
-
You have determined which appliance requires maintenance.
-
To help locate the appliance in your data center, turn on the blue identify LED.
-
Find the appliance in the data center.
-
Look for a lit blue identify LED on the front or rear of the appliance.
The front identify LED is behind the front bezel and might be difficult to see if the bezel is installed.
-
Check the tags attached to the front of the appliance for a matching part number to confirm you have found the correct appliance.
-
-
Remove the front bezel, if one is installed, to access the front panel controls and indicators.
-
Turn off the blue identify LED if you used it to locate the appliance.
-
Press the identify LED switch on the appliance front panel.
-
Use the appliance BMC interface.
-