Skip to main content

Turn appliance identify LED on and off

Contributors netapp-pcelmer netapp-lhalbert netapp-perveilerk
PDFs

The blue identify LED on the front and back of the appliance can be turned on to help locate the appliance in a data center.

Before you begin

You have the BMC IP address of the appliance you want to identify.

Steps

  1. Access the appliance BMC interface.

  2. Select Server Identify.

    The current status of the identify LED is selected.

  3. Select ON or OFF, and then select Perform Action.

    When you select ON, the blue identify LEDs light on the front (shown) and rear of the appliance.

    Front identify LED - on
    Note If a bezel is installed on the controller, it might be difficult to see the front identify LED.

  4. Turn the LED on and off as needed.

Related information

Locate appliance in data center

Access BMC interface