You can deploy Astra Trident by using
|If you have not already familiarized yourself with the basic concepts, now is a great time to do that.|
|To customize your deployment, see here.|
To deploy Astra Trident, the following prerequisites should be met:
You have full privileges to a supported Kubernetes cluster.
You have access to a supported NetApp storage system.
You have the capability to mount volumes from all of the Kubernetes worker nodes.
You have a Linux host with
oc, if you are using OpenShift) installed and configured to manage the Kubernetes cluster that you want to use.
You have set the
KUBECONFIGenvironment variable to point to your Kubernetes cluster configuration.
You have enabled the feature gates required by Astra Trident.
If you are using Kubernetes with Docker Enterprise, follow their steps to enable CLI access.
Got all that? Great! Let’s get started.
|For information about customizing your deployment, see here.|
Step 1: Qualify your Kubernetes cluster
The first thing you need to do is log into the Linux host and verify that it is managing a working, supported Kubernetes cluster that you have the necessary privileges to.
With OpenShift, you use
To check your Kubernetes version, run the following command:
To see if you have Kubernetes cluster administrator privileges, run the following command:
kubectl auth can-i '*' '*' --all-namespaces
To verify if you can launch a pod that uses an image from Docker Hub and reach your storage system over the pod network, run the following command:
kubectl run -i --tty ping --image=busybox --restart=Never --rm -- \ ping <management IP>
Identify your Kubernetes server version. You will use it when you install Astra Trident.
Step 2: Download and extract the installer
|The Trident installer creates a Trident pod, configures the CRD objects that are used to maintain its state, and initializes the CSI sidecars that perform actions, such as provisioning and attaching volumes to the cluster hosts.|
You can download the latest version of the Trident installer bundle from the Downloads section, and extract it.
For example, if the latest version is 21.07.1:
wget https://github.com/NetApp/trident/releases/download/v21.07.1/trident-installer-21.07.1.tar.gz tar -xf trident-installer-21.07.1.tar.gz cd trident-installer
Step 3: Install Astra Trident
Install Astra Trident in the desired namespace by executing the
tridentctl install command.
$ ./tridentctl install -n trident .... INFO Starting Trident installation. namespace=trident INFO Created service account. INFO Created cluster role. INFO Created cluster role binding. INFO Added finalizers to custom resource definitions. INFO Created Trident service. INFO Created Trident secret. INFO Created Trident deployment. INFO Created Trident daemonset. INFO Waiting for Trident pod to start. INFO Trident pod started. namespace=trident pod=trident-csi-679648bd45-cv2mx INFO Waiting for Trident REST interface. INFO Trident REST interface is up. version=21.07.1 INFO Trident installation succeeded. ....
It will look like this when the installer is complete. Depending on the number of nodes in your Kubernetes cluster, you might observe more pods:
$ kubectl get pod -n trident NAME READY STATUS RESTARTS AGE trident-csi-679648bd45-cv2mx 4/4 Running 0 5m29s trident-csi-vgc8n 2/2 Running 0 5m29s $ ./tridentctl -n trident version +----------------+----------------+ | SERVER VERSION | CLIENT VERSION | +----------------+----------------+ | 21.07.1 | 21.07.1 | +----------------+----------------+
If you see output similar to the above example, you’ve completed this step, but Astra Trident is not yet fully configured. Go ahead and continue to the next step. See post-deployment tasks.
However, if the installer does not complete successfully or you don’t see a Running
trident-csi-<generated id>, the platform was not installed.
|For troubleshooting issues during deployment, see the troubleshooting section.|