Skip to main content
A newer release of this product is available.

Storage configuration options

Contributors juliantap
PDFs

See the configuration options available for your Astra Trident configurations.

Global configuration options

These configuration options apply to all Astra Trident configurations, regardless of the storage platform being used.

Option Description Example

version

Config file version number

1

storageDriverName

Name of storage driver

ontap-nas, ontap-san, ontap-nas-economy,
ontap-nas-flexgroup, solidfire-san

storagePrefix

Optional prefix for volume names. Default: netappdvp_.

staging_

limitVolumeSize

Optional restriction on volume sizes. Default: “” (not enforced)

10g
Tip Do not use storagePrefix (including the default) for Element backends. By default, the solidfire-san driver will ignore this setting and not use a prefix. We recommend using either a specific tenantID for Docker volume mapping or using the attribute data which is populated with the Docker version, driver info, and raw name from Docker in cases where any name munging may have been used.

Default options are available to avoid having to specify them on every volume you create. The size option is available for all the controller types. See the ONTAP configuration section for an example of how to set the default volume size.

Option Description Example

size

Optional default size for new volumes. Default: 1G

10G

ONTAP configuration

In addition to the global configuration values above, when using ONTAP, the following top-level options are available.

Option Description Example

managementLIF

IP address of ONTAP management LIF. You can specify a fully-qualified domain name (FQDN).

10.0.0.1

dataLIF

IP address of protocol LIF.

ONTAP NAS drivers: We recommend specifying dataLIF. If not provided, Astra Trident fetches data LIFs from the SVM. You can specify a fully-qualified domain name (FQDN) to be used for the NFS mount operations, allowing you to create a round-robin DNS to load-balance across multiple data LIFs.

ONTAP SAN drivers: Do not specify for iSCSI. Astra Trident uses ONTAP Selective LUN Map to discover the iSCI LIFs needed to establish a multi path session. A warning is generated if dataLIF is explicitly defined.

10.0.0.2

svm

Storage virtual machine to use (required, if management LIF is a cluster LIF)

svm_nfs

username

Username to connect to the storage device

vsadmin

password

Password to connect to the storage device

secret

aggregate

Aggregate for provisioning (optional; if set, must be assigned to the SVM). For the ontap-nas-flexgroup driver, this option is ignored. All aggregates assigned to the SVM are used to provision a FlexGroup Volume.

aggr1

limitAggregateUsage

Optional, fail provisioning if usage is above this percentage

75%

nfsMountOptions

Fine grained control of NFS mount options; defaults to “-o nfsvers=3”. Available only for the ontap-nas and ontap-nas-economy drivers. See NFS host configuration information here.

-o nfsvers=4

igroupName

The igroup used by the plugin; defaults to netappdvp. Available only for the `ontap-san`driver.

myigroup

limitVolumeSize

Maximum requestable volume size and qtree parent volume size. For the ontap-nas-economy driver, this option additionally limits the size of the FlexVols that it creates.

300g

qtreesPerFlexvol

Maximum qtrees per FlexVol, must be in range [50, 300], default is 200. For the ontap-nas-economy driver, this option allows customizing the maximum number of qtrees per FlexVol.

300

Default options are available to avoid having to specify them on every volume you create:

Option Description Example

spaceReserve

Space reservation mode; none (thin provisioned) or volume (thick)

none

snapshotPolicy

Snapshot policy to use, default is none

none

snapshotReserve

Snapshot reserve percentage, default is “” to accept the ONTAP default

10

splitOnClone

Split a clone from its parent upon creation, defaults to false

false

encryption

Enables NetApp Volume Encryption (NVE) on the new volume; defaults to false. NVE must be licensed and enabled on the cluster to use this option.

If NAE is enabled on the backend, any volume provisioned in Astra Trident will be NAE enabled.

For more information, refer to: How Astra Trident works with NVE and NAE.

true

unixPermissions

NAS option for provisioned NFS volumes, defaults to 777

777

snapshotDir

NAS option for access to the .snapshot directory, defaults to false

true

exportPolicy

NAS option for the NFS export policy to use, defaults to default

default

securityStyle

NAS option for access to the provisioned NFS volume.

NFS supports mixed and unix security styles. The default is unix.

unix

fileSystemType

SAN option to select the file system type, defaults to ext4

xfs

tieringPolicy

Tiering policy to use, default is none; snapshot-only for pre-ONTAP 9.5 SVM-DR configuration

none

Scaling options

The ontap-nas and ontap-san drivers create an ONTAP FlexVol for each Docker volume. ONTAP supports up to 1000 FlexVols per cluster node with a cluster maximum of 12,000 FlexVols. If your Docker volume requirements fit within that limitation, the ontap-nas driver is the preferred NAS solution due to the additional features offered by FlexVols, such as Docker-volume-granular snapshots and cloning.

If you need more Docker volumes than can be accommodated by the FlexVol limits, choose the ontap-nas-economy or the ontap-san-economy driver.

The ontap-nas-economy driver creates Docker volumes as ONTAP Qtrees within a pool of automatically managed FlexVols. Qtrees offer far greater scaling, up to 100,000 per cluster node and 2,400,000 per cluster, at the expense of some features. The ontap-nas-economy driver does not support Docker-volume-granular snapshots or cloning.

Note The ontap-nas-economy driver is not currently supported in Docker Swarm, because Swarm does not orchestrate volume creation across multiple nodes.

The ontap-san-economy driver creates Docker volumes as ONTAP LUNs within a shared pool of automatically managed FlexVols. This way, each FlexVol is not restricted to only one LUN and it offers better scalability for SAN workloads. Depending on the storage array, ONTAP supports up to 16384 LUNs per cluster. Because the volumes are LUNs underneath, this driver supports Docker-volume-granular snapshots and cloning.

Choose the ontap-nas-flexgroup driver to increase parallelism to a single volume that can grow into the petabyte range with billions of files. Some ideal use cases for FlexGroups include AI/ML/DL, big data and analytics, software builds, streaming, file repositories, and so on. Trident uses all aggregates assigned to an SVM when provisioning a FlexGroup Volume. FlexGroup support in Trident also has the following considerations:

  • Requires ONTAP version 9.2 or greater.

  • As of this writing, FlexGroups only support NFS v3.

  • Recommended to enable the 64-bit NFSv3 identifiers for the SVM.

  • The minimum recommended FlexGroup size is 100GB.

  • Cloning is not supported for FlexGroup Volumes.

For information about FlexGroups and workloads that are appropriate for FlexGroups see the NetApp FlexGroup Volume Best Practices and Implementation Guide.

To get advanced features and huge scale in the same environment, you can run multiple instances of the Docker Volume Plugin, with one using ontap-nas and another using ontap-nas-economy.

Example ONTAP configuration files

NFS example for ontap-nas driver

{
    "version": 1,
    "storageDriverName": "ontap-nas",
    "managementLIF": "10.0.0.1",
    "dataLIF": "10.0.0.2",
    "svm": "svm_nfs",
    "username": "vsadmin",
    "password": "password",
    "aggregate": "aggr1",
    "defaults": {
      "size": "10G",
      "spaceReserve": "none",
      "exportPolicy": "default"
    }
}

NFS example for ontap-nas-flexgroup driver

{
    "version": 1,
    "storageDriverName": "ontap-nas-flexgroup",
    "managementLIF": "10.0.0.1",
    "dataLIF": "10.0.0.2",
    "svm": "svm_nfs",
    "username": "vsadmin",
    "password": "password",
    "defaults": {
      "size": "100G",
      "spaceReserve": "none",
      "exportPolicy": "default"
    }
}

NFS example for ontap-nas-economy driver

{
    "version": 1,
    "storageDriverName": "ontap-nas-economy",
    "managementLIF": "10.0.0.1",
    "dataLIF": "10.0.0.2",
    "svm": "svm_nfs",
    "username": "vsadmin",
    "password": "password",
    "aggregate": "aggr1"
}

iSCSI example for ontap-san driver

{
    "version": 1,
    "storageDriverName": "ontap-san",
    "managementLIF": "10.0.0.1",
    "dataLIF": "10.0.0.3",
    "svm": "svm_iscsi",
    "username": "vsadmin",
    "password": "password",
    "aggregate": "aggr1",
    "igroupName": "myigroup"
}

NFS example for ontap-san-economy driver

{
    "version": 1,
    "storageDriverName": "ontap-san-economy",
    "managementLIF": "10.0.0.1",
    "dataLIF": "10.0.0.3",
    "svm": "svm_iscsi_eco",
    "username": "vsadmin",
    "password": "password",
    "aggregate": "aggr1",
    "igroupName": "myigroup"
}

Element software configuration

In addition to the global configuration values, when using Element software (NetApp HCI/SolidFire), these options are available.

Option Description Example

Endpoint

https://<login>:<password>@<mvip>/json-rpc/<element-version>

https://admin:admin@192.168.160.3/json-rpc/8.0

SVIP

iSCSI IP address and port

10.0.0.7:3260

TenantName

SolidFireF Tenant to use (created if not found)

docker

InitiatorIFace

Specify interface when restricting iSCSI traffic to non-default interface

default

Types

QoS specifications

See example below

LegacyNamePrefix

Prefix for upgraded Trident installs. If you used a version of Trident prior to 1.3.2 and perform an upgrade with existing volumes, you’ll need to set this value to access your old volumes that were mapped via the volume-name method.

netappdvp-

The solidfire-san driver does not support Docker Swarm.

Example Element software configuration file

{
    "version": 1,
    "storageDriverName": "solidfire-san",
    "Endpoint": "https://admin:admin@192.168.160.3/json-rpc/8.0",
    "SVIP": "10.0.0.7:3260",
    "TenantName": "docker",
    "InitiatorIFace": "default",
    "Types": [
        {
            "Type": "Bronze",
            "Qos": {
                "minIOPS": 1000,
                "maxIOPS": 2000,
                "burstIOPS": 4000
            }
        },
        {
            "Type": "Silver",
            "Qos": {
                "minIOPS": 4000,
                "maxIOPS": 6000,
                "burstIOPS": 8000
            }
        },
        {
            "Type": "Gold",
            "Qos": {
                "minIOPS": 6000,
                "maxIOPS": 8000,
                "burstIOPS": 10000
            }
        }
    ]
}