Skip to main content
A newer release of this product is available.

Troubleshooting

Contributors juliantap
PDFs

Use the pointers provided here for troubleshooting issues you might encounter while installing and using Astra Trident.

General troubleshooting

  • If the Trident pod fails to come up properly (for example, when the Trident pod is stuck in the ContainerCreating phase with fewer than two ready containers), running kubectl -n trident describe deployment trident and kubectl -n trident describe pod trident--** can provide additional insights. Obtaining kubelet logs (for example, via journalctl -xeu kubelet) can also be helpful.

  • If there is not enough information in the Trident logs, you can try enabling the debug mode for Trident by passing the -d flag to the install parameter based on your installation option.

    Then confirm debug is set using ./tridentctl logs -n trident and searching for level=debug msg in the log.

    Installed with Operator
    kubectl patch torc trident -n <namespace> --type=merge -p '{"spec":{"debug":true}}'

    This will restart all Trident pods, which can take several seconds. You can check this by observing the 'AGE' column in the output of kubectl get pod -n trident.

    For Astra Trident 20.07 and 20.10 use tprov in place of torc.

    Installed with Helm
    helm upgrade <name> trident-operator-21.07.1-custom.tgz --set tridentDebug=true`
    Installed with tridentctl
    ./tridentctl uninstall -n trident
./tridentctl install -d -n trident

  • You can also obtain debug logs for each backend by including debugTraceFlags in your backend definition. For example, include debugTraceFlags: {“api”:true, “method”:true,} to obtain API calls and method traversals in the Trident logs. Existing backends can have debugTraceFlags configured with a tridentctl backend update.

  • When using RedHat CoreOS, ensure that iscsid is enabled on the worker nodes and started by default. This can be done using OpenShift MachineConfigs or by modifying the ignition templates.

  • A common problem you could encounter when using Trident with Azure NetApp Files is when the tenant and client secrets come from an app registration with insufficient permissions. For a complete list of Trident requirements, see Azure NetApp Files configuration.

  • If there are problems with mounting a PV to a container, ensure that rpcbind is installed and running. Use the required package manager for the host OS and check if rpcbind is running. You can check the status of the rpcbind service by running a systemctl status rpcbind or its equivalent.

  • If a Trident backend reports that it is in the failed state despite having worked before, it is likely caused by changing the SVM/admin credentials associated with the backend. Updating the backend information using tridentctl update backend or bouncing the Trident pod will fix this issue.

  • If you encounter permission issues when installing Trident with Docker as the container runtime, attempt the installation of Trident with the --in cluster=false flag. This will not use an installer pod and avoid permission troubles seen due to the trident-installer user.

  • Use the uninstall parameter <Uninstalling Trident> for cleaning up after a failed run. By default, the script does not remove the CRDs that have been created by Trident, making it safe to uninstall and install again even in a running deployment.

  • If you want to downgrade to an earlier version of Trident, first run the tridentctl uninstall command to remove Trident. Download the desired Trident version and install using the tridentctl install command.

  • After a successful install, if a PVC is stuck in the Pending phase, running kubectl describe pvc can provide additional information about why Trident failed to provision a PV for this PVC.

Troubleshooting an unsuccessful Trident deployment using the operator

If you are deploying Trident using the operator, the status of TridentOrchestrator changes from Installing to Installed. If you observe the Failed status, and the operator is unable to recover by itself, you should check the logs of the operator by running following command:

tridentctl logs -l trident-operator

Trailing the logs of the trident-operator container can point to where the problem lies. For example, one such issue could be the inability to pull the required container images from upstream registries in an airgapped environment.

To understand why the installation of Trident was unsuccessful, you
should take a look at the TridentOrchestrator status.

kubectl describe torc trident-2
Name:         trident-2
Namespace:
Labels:       <none>
Annotations:  <none>
API Version:  trident.netapp.io/v1
Kind:         TridentOrchestrator
...
Status:
  Current Installation Params:
    IPv6:
    Autosupport Hostname:
    Autosupport Image:
    Autosupport Proxy:
    Autosupport Serial Number:
    Debug:
    Image Pull Secrets:         <nil>
    Image Registry:
    k8sTimeout:
    Kubelet Dir:
    Log Format:
    Silence Autosupport:
    Trident Image:
  Message:                      Trident is bound to another CR 'trident'
  Namespace:                    trident-2
  Status:                       Error
  Version:
Events:
  Type     Reason  Age                From                        Message
  ----     ------  ----               ----                        -------
  Warning  Error   16s (x2 over 16s)  trident-operator.netapp.io  Trident is bound to another CR 'trident'

This error indicates that there already exists a TridentOrchestrator
that was used to install Trident. Since each Kubernetes cluster can only
have one instance of Trident, the operator ensures that at any given
time there only exists one active TridentOrchestrator that it can
create.

In addition, observing the status of the Trident pods can often indicate if something is not right.

kubectl get pods -n trident

NAME                                READY   STATUS             RESTARTS   AGE
trident-csi-4p5kq                   1/2     ImagePullBackOff   0          5m18s
trident-csi-6f45bfd8b6-vfrkw        4/5     ImagePullBackOff   0          5m19s
trident-csi-9q5xc                   1/2     ImagePullBackOff   0          5m18s
trident-csi-9v95z                   1/2     ImagePullBackOff   0          5m18s
trident-operator-766f7b8658-ldzsv   1/1     Running            0          8m17s

You can clearly see that the pods are not able to initialize completely
because one or more container images were not fetched.

To address the problem, you should edit the TridentOrchestrator CR.
Alternatively, you can delete TridentOrchestrator, and create a new
one with the modified and accurate definition.

Troubleshooting an unsuccessful Trident deployment using tridentctl

To help figure out what went wrong, you could run the installer again using the -d argument, which will turn on debug mode and help you understand what the problem is:

./tridentctl install -n trident -d

After addressing the problem, you can clean up the installation as follows, and then run the tridentctl install command again:

./tridentctl uninstall -n trident
INFO Deleted Trident deployment.
INFO Deleted cluster role binding.
INFO Deleted cluster role.
INFO Deleted service account.
INFO Removed Trident user from security context constraint.
INFO Trident uninstallation succeeded.

Completely remove Astra Trident and CRDs

You can completely remove Astra Trident and all created CRDs and associated custom resources.

Warning This cannot be undone. Do not do this unless you want a completely fresh installation of Astra Trident. To uninstall Astra Trident without removing CRDs, see Uninstall Astra Trident.
Trident operator

To uninstall Astra Trident and completely remove CRDs using the Trident operator:

kubectl patch torc <trident-orchestrator-name> --type=merge -p '{"spec":{"wipeout":["crds"],"uninstall":true}}'
Helm

To uninstall Astra Trident and completely remove CRDs using Helm:

kubectl patch torc trident --type=merge -p '{"spec":{"wipeout":["crds"],"uninstall":true}}'
tridentctl

To completely remove CRDs after uninstalling Astra Trident using tridentctl

tridentctl obliviate crd