简体中文版经机器翻译而成，仅供参考。如与英语版出现任何冲突，应以英语版为准。
GetIpmiInfo
贡献者
建议更改
PDF
您可以使用 GetIpmiInfo 方法显示系统监控的节点风扇，进气和排气温度以及电源的传感器（对象）的详细报告。
Parameters
此方法没有输入参数。
返回值
此方法具有以下返回值：
| Name | Description | Type |
|---|---|---|
传感器 |
节点中每个传感器的详细信息。 |
JSON 对象数组 |
请求示例
此方法的请求类似于以下示例：
{
"method": "GetIpmiInfo",
"params": {},
"id" : 1
}
响应示例
由于此 API 方法返回的响应较长，因此本文档特意删除了部分响应。其中包括系统为确保节点以最佳性能运行而监控的部分硬件信息。
{
"id": 1,
"result": {
"ipmiInfo": {
"sensors": [
{
"entityID": "7.1 (System Board)",
"sensorID": "0x72",
"sensorName": "SEL",
"sensorType": "Event Logging Disabled",
"uniqueSensorID": "7.1:0x72"
},
{
"assertionsEnabled": [ "General Chassis intrusion" ],
"deassertionsEnabled": [ "General Chassis intrusion" ],
"entityID": "7.1 (System Board)", "sensorID": "0x73",
"sensorName": "Intrusion",
"sensorType": "Physical Security",
"uniqueSensorID": "7.1:0x73"
},
{THIS ENTIRE SECTION IS REPEATED FOR EACH FAN IN THE SYSTEM
"assertionEvents": [],
"assertionsEnabled": [],
"deassertionsEnabled": [],
"entityID": "7.1 (System Board)",
"eventMessageControl": "Per-threshold",
"lowerCritical": "720.000",
"lowerNonCritical": "840.000",
"maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "600.000",
"nominalReading": "10080.000",
"normalMaximum": "23640.000",
"normalMinimum": "16680.000",
"positiveHysteresis": "600.000",
"readableThresholds": "lcr lnc",
"sensorID": "0x30",
"sensorName": "Fan1A RPM",
"sensorReading": "4440 (+/- 120) RPM",
"sensorType": "Fan",
"settableThresholds": "",
"status": "ok",
"thresholdReadMask": "lcr lnc",
"uniqueSensorID": "7.1:0x30"
},
.
.
.
{THIS ENTIRE SECTION IS REPEATED FOR THE EXHAUST TEMPERATURE OF EACH NODE
"assertionEvents": [],
"assertionsEnabled": [],
"entityID": "7.1 (System Board)",
"eventMessageControl": "Per-threshold",
"lowerCritical": "3.000",
"lowerNonCritical": "8.000",
"maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "1.000",
"nominalReading": "23.000",
"normalMaximum": "69.000",
"normalMinimum": "11.000",
"positiveHysteresis": "1.000",
"readableThresholds": "lcr lnc unc ucr",
"sensorID": "0x1",
"sensorName": "Exhaust Temp",
"sensorReading": "44 (+/- 1) degrees C",
"sensorType": "Temperature",
"settableThresholds": "",
"status": "ok",
"uniqueSensorID": "7.1:0x1",
"upperCritical": "75.000",
"upperNonCritical": "70.000"
},
{THIS ENTIRE SECTION IS REPEATED FOR THE INLET TEMPERATURE OF EACH NODE
"assertionEvents": [],
"assertionsEnabled": [],
"deassertionsEnabled": [],
"entityID": "7.1 (System Board)",
"eventMessageControl": "Per-threshold",
"lowerCritical": "-7.000",
"lowerNonCritical": "3.000",
"maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "1.000",
"nominalReading": "23.000",
"normalMaximum": "69.000",
"normalMinimum": "11.000",
"positiveHysteresis": "1.000",
"readableThresholds": "lcr lnc unc ucr",
"sensorID": "0x4",
"sensorName": "Inlet Temp",
"sensorReading": "20 (+/- 1) degrees C",
"sensorType": "Temperature",
"settableThresholds": "lcr lnc unc ucr",
"status": "ok",
"thresholdReadMask": "lcr lnc unc ucr",
"uniqueSensorID": "7.1:0x4",
"upperCritical": "47.000",
"upperNonCritical": "42.000"
},
{THIS ENTIRE SECTION IS REPEATED FOR EACH POWER SUPPLY ON EACH NODE
"assertionEvents": [],
"assertionsEnabled": [],
"entityID": "10.2 (Power Supply)",
"eventMessageControl": "Per-threshold", "maximumSensorRange": "Unspecified",
"minimumSensorRange": "Unspecified",
"negativeHysteresis": "Unspecified",
"nominalReading": "0.000",
"normalMaximum": "0.000",
"positiveHysteresis": "Unspecified",
"readableThresholds": "No Thresholds",
"sensorID": "0x6d",
"sensorName": "Voltage 2",
"sensorReading": "118 (+/- 0) Volts",
"sensorType": "Voltage",
"settableThresholds": "No Thresholds", "status": "ok", "uniqueSensorID": "10.2:0x6d"
},
.
.
.
}
]
}
}
}
自版本以来的新增功能
9.6