Skip to main content
Active IQ Unified Manager 9.8
9.8
A newer release of this product is available.

Node health fields

Contributors
PDFs

The following fields are available in the Health: All Nodes view and can be used in custom views and in reports.

  • Status

    An icon that identifies the current status of the node. The status can be Critical (Icon for event severity – critical), Error (Icon for event severity – error), Warning (Icon for event severity – warning), or Normal (Icon for event severity – normal).

  • Node

    The name of the node. You can click the node name to navigate to that cluster's node details page.

  • State

    The state of the node. The state can be Up or Down.

  • HA State

    The state of the HA pair. The state can be Error, Warning, Normal, or Not applicable.

  • Down Time

    The time that has elapsed or the timestamp since the node is offline. If the time elapsed exceeds a week, the timestamp when the node went offline is displayed.

  • All Flash Optimized

    Whether the node is optimized to support only solid-state drives (SSDs).

  • Model/Family

    The model of the node.

  • OS version

    The ONTAP software version that the node is running.

  • Serial Number

    The serial number of the node.

  • Firmware Version

    The firmware version number of the node.

  • Aggregate Used Capacity

    The amount of space used for data in the node's aggregates.

  • Aggregate Total Capacity

    The total space available for data in the node's aggregates.

  • Usable Spare Capacity

    The amount of available space in the node that can be used to enhance the aggregate capacity.

  • Usable Raw Capacity

    The amount of space that is usable in the node.

  • Total Raw Capacity

    The capacity of every unformatted disk in the node before right-sizing and RAID configuration.

  • Storage VM Count

    The number of SVMs contained by the cluster.

  • FC Port Count

    The number of FC ports contained by the node.

  • FCoE Port Count

    The number of FCoE ports contained by the node.

  • Ethernet Port Count

    The number of ethernet ports contained by the node.

  • Flash Card Size

    The size of the flash cards installed on the node.

  • Flash Card Count

    The number of flash cards installed on the node.

  • Disk Shelves Count

    The number of disk shelves contained by the node.

  • Disk Count

    The number of disks in the node.

  • Cluster

    The name of the cluster to which the node belongs. You can click the cluster name to navigate to that cluster's health details page.

  • Cluster FQDN

    The fully qualified domain name (FQDN) of the cluster.

  • Contact

    The contact information of the node.

  • Location

    The location of the node.