Skip to main content
SANtricity 11.7
A newer release of this product is available.

View iSCSI statistics packages

Contributors

You can view data about the iSCSI connections to your storage array.

About this task

System Manager shows these types of iSCSI statistics. All statistics are read-only and cannot be set.

  • Ethernet MAC statistics — Provides statistics for the media access control (MAC). MAC also provides an addressing mechanism called the physical address or the MAC address. The MAC address is a unique address that is assigned to each network adapter. The MAC address helps deliver data packets to a destination within the subnetwork.

  • Ethernet TCP/IP statistics — Provides statistics for the TCP/IP, which is the Transmission Control Protocol (TCP) and Internet Protocol (IP) for the iSCSI device. With TCP, applications on networked hosts can create connections to one another, over which they can exchange data in packets. The IP is a data-oriented protocol that communicates data across a packet-switched inter-network. The IPv4 statistics and the IPv6 statistics are shown separately.

  • Local Target/Initiator (Protocol) statistics — Shows statistics for the iSCSI target, which provides block level access to its storage media, and shows the iSCSI statistics for the storage array when used as an initiator in asynchronous mirroring operations.

  • DCBX Operational States statistics — Displays the operational states of the various Data Center Bridging Exchange (DCBX) features.

  • LLDP TLV statistics — Displays the Link Layer Discovery Protocol (LLDP) Type Length Value (TLV) statistics.

  • DCBX TLV statistics — Displays the information that identifies the storage array host ports in a Data Center Bridging (DCB) environment. This information is shared with network peers for identification and capability purposes.

You can view each of these statistics as raw statistics or as baseline statistics. Raw statistics are all of the statistics that have been gathered since the controllers were started. Baseline statistics are point-in-time statistics that have been gathered since you set the baseline time.

Steps
  1. Select Settings  System.

  2. Select View iSCSI Statistics Packages.

  3. Click a tab to view the different sets of statistics.

  4. Optional: To set the baseline, click Set new baseline.

    Setting the baseline sets a new starting point for the collection of the statistics. The same baseline is used for all iSCSI statistics.

See the following sections for more information about the different types of statistics.

MAC transmit and MAC receive statistics

When you select Ethernet MAC statistics, both the receive and transmit statistics appear. You can view each of these statistics as raw statistics or as baseline statistics.

MAC transmit statistics:
Statistic Definition

F

Frame count

B

Byte count

MF

Multicast frame count

BF

Broadcast frame count

PF

Pause frame count

CF

Control frame count

FDF

Frame deferral count

FED

Frame excess deferral count

FLC

Frame late collisions count

FA

Frame abort count

FSC

Frame single collision count

FMC

Frame multiple collisions count

FC

Frame collision count

FDR

Frame dropped count

JF

Jumbo frame count

MAC receive statistics:
Statistic Definition

F

Frame count

B

Byte count

MF

Multicast frame count

BF

Broadcast frame count

PF

Pause frame count

CF

Control frame count

FLE

Frame length error count

FD

Frame dropped count

FCRCE

Frame CRC error count

FEE

Frame encoding error count

LFE

Large frame error count

SFE

Small frame error count

J

Jabber count

UCC

Unknown control frame count

CSE

Carrier sense error count

Ethernet TCP/IP statistics

When you select Ethernet TCP/IP statistics, both the TCP and IP statistics appear. You can view each of these statistics as raw statistics or as baseline statistics.

Ethernet TCP statistics:
Statistic Definition

TxS

Transmitted segment count

TxB

Transmitted byte count

RTxTE

Retransmit timer expired count

TxDACK

Transmit delayed ACK count

TxACK

Transmit ACK count

RxS

Received segment count

RxB

Received byte count

RxDACK

Received duplicate ACK count

RxACK

Received ACK count

RxSEC

Received segment error count

RxSOOC

Received segment out-of-order count

RxWP

Received window probe count

RxWU

Received window update count

Ethernet IP statistics:
Statistic Definition

TxP

Transmitted packet count

TxB

Transmitted byte count

TxF

Transmitted fragment count

RxP

Packets received count. Select Show IPv4 to show the IPv4 packets received count. Select Show IPv6 to show the IPv6 packets received count.

RxB

Received byte count

RxF

Received fragment count

RxPE

Received packet error count

DR

Datagram reassembly count

DRE-OLFC

Datagram reassembly error, overlapped fragment count

DRE-OOFC

Datagram reassembly error, out-of-order fragment count

DRE-TOC

Datagram reassembly error, time-out count

iSCSI target statistics and local initiator statistics

When you select Target (protocol) statistics or Local initiator (protocol) statistics, the iSCSI statistics appear. You can view each of these statistics as raw statistics or as baseline statistics.

iSCSI statistics:
Statistic Definition

SL

Successful iSCSI login count

UL

Unsuccessful iSCSI login count

SA

Successful iSCSI authentication count (when authentication is enabled)

UA

Unsuccessful iSCSI authentication count (when authentication is enabled)

PDU

Correct iSCSI PDUs processed count

HDE

iSCSI PDUs with header digest errors count

DDE

iSCSI PDUs with data digest errors count

PE

PDUs with iSCSI protocol errors count

UST

Unexpected iSCSI session terminations count

UCT

Unexpected iSCSI connection termination count

DCBX operational state statistics

When you select Data Center Bridging Exchange (DCBX) Operational State Statistics, the DCBX statistics appear.

DCBX statistics:
Statistic Definition

iSCSI Host Port

Indicates the location of the detected host port in Controller #, Port # format.

Priority Group

Indicates the operational state of the Priority Group (PG) application. The state is either Enabled or Disabled.

Priority-based Flow Control

Indicates the operational state of the Priority-based Flow Control (PFC) feature. The state is either Enabled or Disabled.

iSCSI Feature

Indicates the operational state of the Internet Small Computer System Interface (iSCSI) application. The state is either Enabled or Disabled.

FCoE Bandwidth

Indicates the state of the Fibre Channel over Ethernet (FCoE) Bandwidth. The state is either True or False.

No FCoE/FIP Map Mismatch

Indicates whether a map mismatch exists between FCoE and FCoE Initialization Protocol (FIP). The value is either True or False.

Note You can find additional DCBX operational state statistics in the state capture file.

LLDP TLV statistics

When you select Link Layer Discovery Protocol (LLDP) Type Length Value (TLV) Statistics, two sets of statistics appear: one for the local device and one for the remote device. The local device refers to the controller. The remote device refers to the peer device that the controller is attached to, typically a switch.

LLDP TLV statistics:
Statistic Definition

iSCSI Host Port

Indicates the location of the detected host port in Controller #, Port # format.

Chassis ID

Indicates the chassis ID.

Chassis ID Subtype

Indicates the chassis ID subtype.

Port ID

Indicates the port ID.

Port ID Subtype

Indicates the port ID subtype.

Time to Live

Indicates the number of seconds that the recipient LLDP agent considers the information to be valid.

Note You can find additional LLDP TLV statistics in the state capture file.

DCBX TLV statistics

When you select Data Center Bridging Exchange (DCBX) Type Length Value (TLV) Statistics, these statistics appear:

  • Local statistics — The DCBX parameters configured on the controller at the factory.

  • Operational statistics — The DCBX parameters that result from DCBX negotiations.

  • Remote statistics — The DCBX parameters from the peer device that the controller is connected to, typically a switch.

DCBX TLV statistics:
Statistic Definition

iSCSI Host Port

Indicates the location of the detected host port in Controller #, Port # format.

Flow Control Mode

The Flow Control Mode of the entire port. Valid values are Disabled, Standard, Per Priority, or Indeterminate.

Protocol

The communication protocol. Valid values are FCoE, FIP, iSCSI, or UNKNOWN.

Priority

Integer value indicating the priority number of the communication.

Priority Group

Integer value representing the priority group to which the protocol has been assigned.

Priority Group % Bandwidth

Percentage value indicating the amount of bandwidth allocated to the priority group.

DCBX PFC Status

Priority-based Flow Control (PFC) status of the specific port. The value is either enabled or disabled.

Note You can find additional DCBX TLV statistics in the state capture file.