Skip to main content
SANtricity 11.9

Reconstruct drive manually

Contributors netapp-jolieg netapp-driley
PDFs

Drive reconstruction normally starts automatically after you replace a drive. If drive reconstruction does not start automatically, you can start reconstruction manually.

Note

Perform this operation only when instructed to do so by technical support or the Recovery Guru.
Steps

  1. Select Hardware.

  2. If the graphic shows the controllers, click the Drives tab.

    The graphic changes to show the drives instead of the controllers.

  3. Click the drive that you want to manually reconstruct.

    The drive's context menu appears.

  4. Select Reconstruct, and confirm that you want to perform the operation.