Skip to main content

metrocluster transition enable

Contributors
Suggest changes

Enable Transition

Availability: This command is available to cluster administrators at the advanced privilege level.

Description

The metrocluster transition enable command is used to start the transition from a MetroCluster FC to a MetroCluster IP configuration. The command sets the transition mode on the local and partner cluster.

Parameters

-transition-mode <Mode For FC To Ip Transition> - Transition Mode (privilege: advanced)

This parameter specifies the setting for the transition-mode.

[-force {true|false}] - Force enable (privilege: advanced)

This optional parameter forces the setting for the transition-mode.

Examples

The following example shows how to enable the non-disruptive transition mode:

clusA::> metrocluster transition enable transition-mode non-disruptive
clusA::> metrocluster transition show-mode
 Transition Mode
 --------------------------
 non-disruptive

The following example shows how to enable the disruptive transition mode:

clusA::> metrocluster transition enable transition-mode disruptive
clusA::> metrocluster transition show-mode
 Transition Mode
 --------------------------
disruptive