Skip to main content

system controller flash-cache secure-erase show

Contributors
Suggest changes

Display the Flash Cache card status

Availability: This command is available to cluster administrators at the admin privilege level.

Description

The system controller flash-cache secure-erase show command displays the current Flash Cache device secure-erase status.

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

| [-instance ] }

If you specify the -instance parameter, the command displays detailed information about all fields.

[-node {<nodename>|local}] - Node

If this parameter is specified, only status information for the matching node is displayed.

[-device-id <integer>] - Device Id

If this parameter is specified, only status information for the matching device-id is displayed.

[-device-state {ok|erasing|erased|failed|removed}] - Device State

If this parameter is specified, only status information for the matching device-state is displayed.

Examples

The following example displays the current state of all the Flash Cache devices:

cluster1::> system controller flash-cache secure-erase show
Node      Device ID Slot Device State
--------- --------- ---- ------------
node1
                  0 6-1  ok
                  1 6-2  erasing
node2
                  0 6-1  erased
                  1 6-2  ok
4 entries were displayed.