Skip to main content
ONTAP commands
A newer release of this product is available.

system node hardware tape library show

Suggest changes
PDFs

Display information about tape libraries

Availability: This command is available to cluster administrators at the admin privilege level.

Description

This command displays the following information about tape libraries:

  • Node to which the tape library is attached

  • Device ID of the tape library

  • Description of the tape library

  • NDMP path of the tape library

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

| [-instance ] }

If you specify the -instance parameter, the command displays detailed information about all fields.

[-node {<nodename>|local}] - Node

Displays detailed information about tape libraries on the specified node.

[-device-id <text>] - Device ID

Selects information about the tape library that has the specified device ID.

[-description <text>] - Description

Selects information about the tape library or libraries that have the specified description.

[-wwn <text>] - World Wide Name

Selects information about the tape library that has the specified worldwide name.

[-serial-number <text>] - Serial Number

Selects information about the tape library that has the specified serial number.

[-ndmp-path <text>] - NDMP Path

Selects information about the tape library or libraries that have the specified NDMP path.

Examples

The following example displays information about all tape libraries attached to the cluster:

cluster1::> system node hardware tape library show
Node   Device Id Drive Description    NDMP Path
------ --------- -------------------- -----------------
cluster1-00
       0b.125L1  HP       MSL G3      mc1
                 Series
       0c.125L1  HP       MSL G3      mc0
                 Series
2 entries were displayed.