ERROR

This message occurs when a disk reports a sector size that does not match the drive qualification table.

Replace the disk.

Disk %s has an unexpected sector size (%d bytes) and cannot be used.

diskName (STRING): Name of the disk.
sector_size (INT): Invalid sector size.

ERROR

This message occurs when a capacity-optimized flash solid-state drive (SSD) is detected by a node that does not support this type of SSD.

Remove the disk from the system.

Disk %s cannot be used on a node that does not support capacity-optimized flash.

diskName (STRING): Name of the disk.

ERROR

This message occurs when a hard disk drive (HDD) is detected by a node configured with the All-Flash Optimized personality. With this personality, only solid-state drives (SSD) can be used.

Remove the disk from the system.

Disk %s cannot be used on a node configured as All-Flash Optimized.

diskName (STRING): Name of the disk.

ERROR

This message occurs when a non-NVMe drive is detected by a node that only supports NVMe drives.

Remove the drive from the system.

Drive %s cannot be used on a node that only supports NVMe drives.

diskName (STRING): Name of the drive.

ERROR

This message occurs when a non-self-encrypting drive (non-SED) is detected by a node that only supports self-encrypting drives (SEDs).

Remove the drive from the system.

Drive %s cannot be used on a node that only supports SEDs.

diskName (STRING): Name of the drive.

ERROR

This message occurs when an unsupported NVMe solid-state drive (SSD) is discovered in an external NVMe shelf. This NVMe SSD is only supported as an internal drive on the A800 system.

Remove the drive from the external NVMe shelf.

Drive %s cannot be used in an external NVMe shelf.

disk_name (STRING): Name of the SSD.
disk_information (STRING): Formatted information about the SSD. This includes the drive's vendor, model, firmware revision, and serial number.

ERROR

This message occurs when an unsupported disk is detected on a node.

Remove the disk from the system.

Disk %s is not recognized as a supported disk and cannot be used on this node.

diskName (STRING): Name of the disk.

ERROR

This message occurs when a zoned namespace solid-state drive (SSD-ZNS) is detected by a node that does not support this type of SSD.

Remove the disk from the system.

Disk "%s" cannot be used on a node that does not support SSD-ZNS disks.

diskName (STRING): Name of the disk.

ERROR

This message occurs when a disk reports an unexpected capacity.

Replace the disk.

Disk %s has an unexpected capacity (%llu sectors) and cannot be used. Replace it.

diskName (STRING): Name of the disk.
lastSector (LONGINT): Last sector of the disk.
productID (STRING): Product name of the disk.

ERROR

This message occurs when the inquiry command does not return a valid serial number or device ID for the device. The device is failed during initialization.

Replace the disk.

Serial number or device ID not available for %s.

disk_name (STRING): Disk name.
page_code (INT): Page code that was sent.
error_pcode (INT): Page code received in error.

ERROR

This message occurs when a drive fails initialization. For NVMe drives, the returned error information is translated into the SCSI equivalent.

Replace the drive.

Drive %s failed initialization due to error %d, sense code(%x %x %x %x).

diskName (STRING): Name of the drive.
errorCode (INT): Internal E_SCSI return code.
sense_key (INTHEX): Sense key.
sense_code (INTHEX): Additional sense code.
qualifier (INTHEX): Additional sense code qualifier.
fru_failed (INTHEX): FRU code.

ERROR

This message occurs when a disk cannot spin up during initialization. The disk is marked as failed and is not used.

Removed the disk from the system.

Disk %s has failed to spin up and cannot be used. Replace it with a new drive.

diskName (STRING): Name of the disk.

ERROR

This message occurs when the system discovers a previously failed disk. The system will not use the disk and it should be replaced.

Replace the failed disk.

Failed disk %s detected during disk initialization.

diskName (STRING): Name of the disk.

INFORMATIONAL

This message occurs when a disk contains a Dynamic Drive Recognition (DDR) label entry that is not for this disk. The system rewrites the DDR label with proper values.

(None).

Disk %s has an invalid DDR entry. DDR label will be corrected and rewritten automatically.

diskName (STRING): Name of the disk.
vendorID (STRING): Vendor name of the disk.
productID (STRING): Product name of the disk.

ERROR

This message occurs when a hard disk drive (HDD) has a protection type enabled that is not supported. Protection type is a disk option that determines how information is physically saved on the disk.

Remove the disk from the system.

Disk %s has protection type %x enabled and cannot be used. %s

diskName (STRING): Name of the disk.
protType (INTHEX): Value indicating the version of the enabled protection type.
disk_information (STRING): Formatted information about the disk. This includes the disk's vendor, model, firmware revision, and serial number.

INFORMATIONAL

This message occurs when a Dynamic Drive Recognition (DDR) label on a drive with dynamically qualified data is properly updated with aliased data.

(None).

Disk %s has been updated with the proper drive name alias. The DDR label will be rewritten automatically.

diskName (STRING): Name of the disk.
vendorID (STRING): Vendor name of the disk.
productID (STRING): Product name of the disk.

ERROR

This message occurs when a unique identifier cannot be created for a disk due to internal disk problems.

The disk needs to be replaced, remove it from the system.

Unable to identify disk %s.

diskName (STRING): Name of the disk.