INFORMATIONAL

This message occurs when disk sanitization has been completed.

(None).

Disk %s [S/N %s] has completed sanitization.

diskName (STRING): Name of the device.
serialno (STRING): Serial number of the device.

ERROR

This message occurs when a disk returns an error during sanitization.

Verify that the drive is capable of sanitization and check the knowledgebase of the support vendor website for the error codes.

Disk %s has received an error %d (0%xh/0%xh/0%xh/0%xh) during sanitization.

diskName (STRING): Name of the disk.
scsi_error (INT): SCSI error code.
sense_key (INT): Actual sense key.
sense_code (INT): Actual sense code.
qualifier (INT): Actual sense code qualifier.
fru_failed (INT): Actual FRU code.

INFORMATIONAL

This message occurs when the disk sanitization format phase is complete.

(None).

Disk sanitization format complete for disk %s [S/N %s], begin pattern writes.

diskName (STRING): Name of the device.
serialno (STRING): Serial number of the device.

ERROR

This message occurs when disk sanitization formatting fails.

(None).

Disk %s has received an error %d (0%xh/0%xh/0%xh) during the formatting of the drive. Format will be retried within fifteen minutes.

diskName (STRING): Name of the device.
status (INT): Error code.
sense_key (INTHEX): Actual sense key.
sense_code (INTHEX): Actual sense code.
qualifier (INTHEX): Actual sense code qualifier.

ERROR

This message occurs when disk sanitization reformatting has been retried unsuccessfully the maximum number of times.

Disk sanitization reformatting attempts have been unsuccessful. To make the disk usable, it must be reformatted. You can do this in maintenance mode with the SCSI "format" command.

Disk sanitization reformat has failed for disk %s.

diskName (STRING): Name of the device.

INFORMATIONAL

This message occurs when disk sanitization has completed a cycle of a pattern write.

(None).

Disk %s [S/N %s] cycle %d pattern write of 0x%02x completed in %02d:%02d:%02d.

diskName (STRING): Name of the device.
serialno (STRING): Serial number of the device.
cycle (INT): Sanitization cycle.
pattern (INT): Pattern byte.
hours (INT): Time in hours.
minutes (INT): Time in minutes.
seconds (INT): Time in seconds.

INFORMATIONAL

This message occurs when disk sanitization has completed a cycle of random data write.

(None).

Disk %s [S/N %s] cycle %d pattern write of random data completed in %02d:%02d:%02d.

diskName (STRING): Name of the device.
serialno (STRING): Serial number of the device.
cycle (INT): Sanitization cycle.
hours (INT): Time in hours.
minutes (INT): Time in minutes.
seconds (INT): Time in seconds.

INFORMATIONAL

This message occurs when disk sanitization reformatting is complete.

(None).

Disk %s has been successfully reformatted. To sanitize disk, restart the disk sanitize command. To bypass format, use -s option.

diskName (STRING): Name of the device.

INFORMATIONAL

This message occurs when the SCSI sanitize command phase of a 'disk sanitize' command is complete, and the data pattern write phase begins.

(None).

Sanitization phase of the 'disk sanitize' command was completed for disk %s [S/N %s]. Pattern writes have begun.

diskName (STRING): Name of the device.
serialno (STRING): Serial number of the device.