Skip to main content

Stage 3 overview

Contributors netapp-pcarriga netapp-aoife
PDFs

During Stage 3, you install and boot node3, map the cluster and node-management ports from node1 to node3, and verify the node3 installation. If required, you set the FC or UTA/UTA2 configuration on node3 and confirm that node3 has joined quorum. You also relocate the node1 NAS data LIFs and non-root aggregates from node2 to node3 and verify that the SAN LIFs exist on node3.

Steps

  1. Install and boot node3

  2. Set the FC or UTA/UTA2 configuration on node3

  3. Map ports from node1 to node3

  4. Joining the quorum when a node has a different set of network ports

  5. Verify the node3 installation

  6. Move non-root aggregates and NAS data LIFs owned by node1 from node2 to node3