Skip to main content

Stage 5 overview

Contributors netapp-pcarriga netapp-aoife
PDFs

During Stage 5, you install and boot node4, map the cluster and node-management ports from node2 to node4, verify the node4 installation, and move data LIFs and SAN LIFs belonging to node2 from node3 to node4. You also relocate node2 aggregates from node3 to node4.

Steps

  1. Install and boot node4

  2. Set the FC or UTA/UTA2 configuration on node4

  3. Map ports from node2 to node4

  4. Verify the node4 installation

  5. Move NAS data LIFs owned by node2 from node3 to node4 and verify SAN LIFs on node4

  6. Relocate node2 non-root aggregates from node3 to node4