Viewing status indicators and buttons on the SG6000-CN controller

11/22/2022 Contributors

The SG6000-CN controller includes indicators that help you determine the status of the controller, including the following indicators and buttons.

	Display	Description
1	Power button	Blue: The controller is powered on. Off: The controller is powered off.
2	Reset button	No indicator Use this button to perform a hard reset of the controller.
3	Identify button	Blinking or solid blue: Identifies the controller in the cabinet or rack. Off: The controller is not visually identifiable in the cabinet or rack. This button can be set to Blink, On (Solid), or Off.
4	Alarm LED	Amber: An error has occurred. Note: To view the boot-up and error codes, you must access the BMC interface. Off: No errors are present.

Display

Description

Power button

Reset button

No indicator

Use this button to perform a hard reset of the controller.

Identify button

This button can be set to Blink, On (Solid), or Off.

Alarm LED

Amber: An error has occurred.

Note: To view the boot-up and error codes, you must access the BMC interface.
Off: No errors are present.

General boot-up codes

During boot-up or after a hard reset of the SG6000-CN controller, the following occurs:

The baseboard management controller (BMC) logs codes for the boot-up sequence, including any errors that occur.
The power button lights up.
If any errors occur during boot-up, the alarm LED lights up.

To view the boot-up and error codes, you must access the BMC interface.

Related information