View status indicators and buttons on SG6000-CN controller

Contributors netapp-perveilerk netapp-lhalbert

The SG6000-CN controller includes indicators that help you determine the status of the controller, including the following indicators and buttons.

Front Indicators - SG6000-CN
Display Description

1

Power button

  • Blue: The controller is powered on.

  • Off: The controller is powered off.

2

Reset button

No indicator

Use this button to perform a hard reset of the controller.

3

Identify button

  • Blinking or solid blue: Identifies the controller in the cabinet or rack.

  • Off: The controller is not visually identifiable in the cabinet or rack.

This button can be set to Blink, On (Solid), or Off.

4

Alarm LED

  • Amber: An error has occurred.

    Note: To view the boot-up and error codes, you must access the BMC interface.

  • Off: No errors are present.

General boot-up codes

During boot-up or after a hard reset of the SG6000-CN controller, the following occurs:

  1. The baseboard management controller (BMC) logs codes for the boot-up sequence, including any errors that occur.

  2. The power button lights up.

  3. If any errors occur during boot-up, the alarm LED lights up.

    To view the boot-up and error codes, you must access the BMC interface.