Skip to main content

Replace other hardware components

Contributors netapp-perveilerk
PDFs

You might need to replace a controller battery, drive, fan, or power supply, in the StorageGRID appliance.

What you'll need

  • You have the E-Series hardware replacement procedure.

  • The appliance has been placed maintenance mode if the component replacement procedure requires that you shut down the appliance.

About this task

To replace the battery in the E2800 controller, see the instructions in these instructions for replacing the E2800 controller. Those instructions describe how to remove the controller from the appliance, remove the battery from the controller, install the battery, and replace the controller.

To replace a drive, power-fan canister, fan canister, power canister, or drive drawer in the appliance, access the E-Series procedures for maintaining E2800 hardware.

SG5712 component replacement instructions

FRU See E-Series instructions for

Drive

Replacing a drive in E2800 12-drive or 24-drive shelves

Power-fan canister

Replacing a power-fan canister in E2800 shelves

SG5760 component replacement instructions

FRU See E-Series instructions for

Drive

Replacing a drive in E2860 shelves

Power canister

Replacing a power canister in E2860 shelves

Fan canister

Replacing a fan canister in E2860 shelves

Drive drawer

Replacing a drive drawer in E2860 shelves
Related information

Replace E2800 controller

NetApp E-Series Systems Documentation Site