Remove SG6000-CN controller cover

Contributors netapp-pcelmer netapp-perveilerk

Remove the controller cover to access internal components for maintenance.

What you’ll need

Remove the controller from the cabinet or rack to access the top cover.

Steps
  1. Make sure that the SG6000-CN controller cover latch is not locked. If necessary, turn the blue plastic latch lock one-quarter turn in the unlock direction, as shown on the latch lock.

  2. Rotate the latch up and back toward the rear of the SG6000-CN controller chassis until it stops; then, carefully lift the cover from the chassis and set it aside.

    SG6060 and SG6060X cover latch open
    Important Wrap the strap end of an ESD wristband around your wrist and secure the clip end to a metal ground to prevent static discharge when working inside the SG6000-CN controller.
Related information

Remove Fibre Channel HBA