重新整理 NVMe 資料 LIFs
啟用 NVMe 資料 LIF 重新整理,讓已發佈的 NVMe Volume 能夠使用已新增、移除或指派新位址的 LIF,而無需重新建立後端或重新啟動 Trident。
總覽
當您新增 ONTAP SAN 後端時,Trident 會發現 SVM 的 NVMe 資料 LIF。預設情況下,Trident 會保留這組 LIF,直到您再次新增後端或重新啟動 Trident。
將 enableDataLIFRefresh`設定為 `true,以便在 Trident 執行時重新整理 NVMe 資料 LIF。已發佈的 NVMe Volume 接著會使用已新增、已移除或已指派新位址的 LIF。
此選項為安裝參數,而非後端組態參數。預設為停用。
從 Trident 26.10 開始,可使用 NVMe 資料 LIF 重新整理。
此功能適用於:
-
ontap-san搭配sanType: nvme於統一的 ONTAP 上。 -
`ontap-san`在 ASA r2 上使用 NVMe/TCP。
|
|
同時移除或取代所有資料 LIF 會造成中斷。如果您打算移除或取代所有資料 LIF,請確保先部署一個替代 LIF,以避免資料存取中斷。 |
啟用 NVMe 資料 LIF 重新整理
Trident運算子
若要進行新的安裝,請在 TridentOrchestrator spec 中設定 enableDataLIFRefresh:
apiVersion: trident.netapp.io/v1
kind: TridentOrchestrator
metadata:
name: trident
spec:
namespace: trident
enableDataLIFRefresh: true
套用清單:
kubectl apply -f tridentorchestrator_cr.yaml
對於現有安裝,請修補 TridentOrchestrator:
kubectl patch torc trident --type=merge -p '{"spec":{"enableDataLIFRefresh":true}}'
驗證所應用的值:
kubectl get torc trident -o jsonpath='{.status.currentInstallationParams.enableDataLIFRefresh}'
掌舵
對於全新安裝,請設定 Helm 值:
helm install trident netapp-trident/trident-operator \
--namespace trident --create-namespace \
--set enableDataLIFRefresh=true
對於現有的 Helm 安裝,請使用啟用的值升級版本:
helm upgrade trident netapp-trident/trident-operator \
--namespace trident \
--reuse-values \
--set enableDataLIFRefresh=true
您也可以在 Helm 值檔案中設定 enableDataLIFRefresh: true,並透過 -f <values-file>`將其傳遞給 `helm upgrade。
試用
對於全新安裝,請使用 --enable-datalif-refresh 旗標:
tridentctl install --enable-datalif-refresh -n trident
若要在現有 `tridentctl`安裝中啟用此選項,請解除安裝 Trident 並使用該旗標重新安裝。解除安裝前,請遵循 "解除安裝Trident" 中的注意事項。
tridentctl uninstall -n trident
tridentctl install --enable-datalif-refresh -n trident
|
|
此 `--enable-datalif-refresh`標誌是安裝選項,不會顯示在 `tridentctl install --help`中。 |