Skip to main content
Element Software
A newer release of this product is available.

Upgrade your vSphere components for a NetApp SolidFire storage system with the Element Plug-in for vCenter Server

Contributors netapp-pcarriga netapp-dbagwell

When you upgrade the VMware vSphere components of your SolidFire Element storage installation, there are some additional steps you will need to take for systems with Element Plug-in for vCenter Server.

Steps
  1. For vCSA upgrades, clear QoSSIOC settings in the plug-in (NetApp Element Configuration > QoSSIOC Settings). The QoSSIOC Status field displays Not Configured after the process is complete.

  2. For vCSA and Windows upgrades, unregister the plug-in from the vCenter Server with which it is associated using the registration utility.

  3. Upgrade vSphere, including vCenter Server, ESXi, VMs, and other VMware components.

    Important

    You should upgrade to NetApp Element Plug-in for vCenter Server 5.0 or later to give you the capability to deploy the plug-in with VMware vCenter 7.0 Update 3 without having to apply a workaround.

    With Element Plug-in for vCenter Server 4.x, when you upgrade to VMware vCenter Server 7.0 Update 3, the plug-in fails to deploy. To resolve this issue using Spring Framework 4, see this KB article.

  4. Register the Element Plug-in for vCenter Server again with vCenter.

  5. Add clusters using the plug-in.

  6. Configure QoSSIOC settings using the plug-in.

  7. Enable QoSSIOC for all datastores controlled by the plug-in.