Skip to main content

volume conversion validation show

Contributors
Suggest changes

Show the result of volume conversion pre checks.

Availability: This command is available to cluster administrators at the advanced privilege level.

Description

The volume conversion validation show command displays the results of volume conversion validation for volumes.

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

| [-instance ] }

If you specify the -instance parameter, the command displays detailed information about all fields.

[-vserver <vserver name>] - Vserver (privilege: advanced)

If this parameter is specified, the command displays information only about the conversion operations that are running on volumes on the specified Vserver.

[-volume <volume name>] - Volume (privilege: advanced)

If this parameter is specified, the command displays information only about the conversion operations on the specified volume.

[-precheck <Volume conversions pre check>] - Volume Feature (privilege: advanced)

If this parameter is specified, the command displays information only about the specified conversion pre checks.

[-status <Feature status for volume conversion>] - Feature Status (privilege: advanced)

If this parameter is specified, the command displays information only about the conversion pre checks with the specified status. The supported statuses are:

  • supported -The volume can be converted.

  • warn - The volume can be converted, though there may be an issue highlighted by a warning in the error value.

  • block - The volume cannot be converted until the specified action is taken

  • unsupported - The volume cannot be convernted.

  • error - There was an error performing the pre check.

[-error <text>] - Feature Error (privilege: advanced)

If this parameter is specified, the command displays information only about the conversion pre checks with the specified error message.

[-action <text>] - Feature Action (privilege: advanced)

If this parameter is specified, the command displays information only about the onversion pre checks with the specified resolution action.

Examples

The following example displays all conversion pre checks

cluster::*> volume conversion validation show

The following example displays all conversion pre checks that block conversion until an action is taken, for volume 'vol1' in Vserver 'vs0'

cluster::*> volume conversion validation show -vserver vs0 -volume vol1 -status block