The boot media stores a primary and secondary set of boot image files that the system uses when it boots.

The chassis is the physical enclosure housing all the controller components such as the controller/CPU unit, power supply, and I/O.

A controller consists of a board, firmware, and software. It controls the drives and implements the ONTAP functions.

You must replace a DIMM (dual in-line memory module) when a memory mismatch is present, or you have a failed DIMM.

A drive is a device that provides the physical storage media for data.

The fan cools the controller.

The NVRAM (Non-Volatile Random Access Memory) is a module that allows the controller to protect and save in-flight data if the system loses power. The system ID resides in the NVRAM module. When replaced, the controller assumes the new system ID from the replacement NVRAM module.

The NVRAM battery is responsible for providing power to the NVRAM module while data in-flight is being destaged to flash memory after a power loss.

The I/O module (Input/Output module) is a hardware component that acts as an intermediary between the controller and various devices or systems that need to exchange data with the controller.

A power supply provides a redundant power source in a controller.

A real time clock battery preserves system date and time information if the power is off.

The System Management module provides the interface between the controller and a console or laptop for controller or system maintenance purposes. The System management module contains the boot media and stores the system serial number (SSN).