Skip to main content

network bgp config show

Contributors
Suggest changes
PDFs

Display BGP configuration

Availability: This command is available to cluster administrators at the admin privilege level.

Description

The network bgp config show command displays the border gateway protocol (BGP) configuration for each node.

Parameters

{ [-fields <fieldname>,…​]

If you specify the -fields <fieldname>, …​ parameter, the command output also includes the specified field or fields. You can use '-fields ?' to display the fields to specify.

| [-instance ] }

If you specify the -instance parameter, the command displays detailed information about all fields.

[-node {<nodename>|local}] - Node

This parameter selects the BGP configurations that match the specified node.

[-asn <integer>] - Autonomous System Number

This parameter selects the BGP configurations that match the specified autonomous system number.

[-hold-time <integer>] - Hold Time

This parameter selects BGP configurations that match the specified hold time.

[-router-id <IP Address>] - Router ID

This parameter selects the BGP configurations that match the specified router ID.

Examples

cluster1::> network bgp config show
        Autonomous
        System    Hold Time
    Node    Number    (seconds)  Router ID
    ---------------  ---------------  ---------------  ---------
    node1    10    180    10.0.1.112