Skip to main content

Stage 5 overview

Contributors netapp-pcarriga netapp-aoife
PDFs

During Stage 5, you install and boot node4, map the cluster and node-management ports from node2 to node4, and verify the node4 installation. If required, you set the FC or UTA/UTA2 configuration on node4 and confirm that node4 has joined quorum. You also relocate node2 NAS data LIFs and non-root aggregates from node3 to node4 and verify the SAN LIFs exist on node4.

Steps

  1. Install and boot node4

  2. Set the FC or UTA/UTA2 configuration on node4

  3. Map ports from node2 to node4

  4. Join the quorum when a node has a different set of network ports

  5. Verify the node4 installation

  6. Move non-root aggregates and NAS data LIFs owned by node2 from node3 to node4