QLogic FC Switch data source

For configuration, the QLogic FC Switch (SNMP) data source requires the network address for the FC Switch device, specified as an IP address, and an SNMP read-only community string used to access the device.

Configuration

Field Description
SANSurfer Switch IP address or fully-qualified domain name for the SANSurfer switch
SNMP version SNMP version
SNMP community SNMP Community String
User Name User name for the SANSurfer switch
Password Password for the SANSurfer switch

Advanced configuration

Field Description
Inventory Poll Interval (min) Interval between inventory polls (default 15 minutes)
SNMP Auth Protocol SNMP authentication protocol (SNMPv3 only)
SNMP Retries Number of SNMP retry attempts
SNMP Timeout (ms) SNMP timeout (default 5000 ms)
Enable Trapping Select to enable trapping
Minimum Time Between Traps (sec) Minimum time between acquisition attempts triggered by traps (default 10 seconds)
Fabric Name Fabric name to be reported by the data source. Leave blank to report the fabric name as WWN.
Performance Poll Interval (sec) Interval between performance polls (default 300 seconds)